Jump to content
SAU Community

Recommended Posts

top quality cars top quality price

i haven't heard anything else so if your gut it ok then go for it

don't bother with the 3 yr extended warranty 95% of what could go wrong with the car isn't covered it should take about $900 off the cost

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282389
Share on other sites

about 7 years ago there werent very good stories but from what i have heard over the past few years has been really good reps as long as the car checks out with a mechanic then go for it but i agree with steve dont get the warranty there is no point and it will save you a few $$$$

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282429
Share on other sites

People say that they have heard bad stories from Redline. But my R32 was sold by them back in 2002, and Vince from Import Compliance Systems has been over it and said its one of the the best GTSt's he has seen to date... Would I buy a car from Redline? Yes.

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282487
Share on other sites

Ok, first of all the topic title "Dealer" is just stupid - you need to make the title state exactly what the topic is about, and what you want to ask.

Secondly this has been covered 1,000,000 times before .... ALWAYS use the search function.

Thirdly, the guys selling at Redline have always struck me as arrogant fools, and the cars are stupidly overpriced IMHO.

That is all.

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282534
Share on other sites

What are peoples impression for Redline Motorsports?

I'm looking at buying a car from them tomorrow!!!!!!!!!!

What car you after exactly? Id trowl through car sales and call a few that you like (interstate also), always ask the relevant questions ie service history, auction papers, export certificates etc

If you have a good feeling then organise an inspection through a mechanic, RAA or state roads depending on where the car is located. All goes well, seriously think about purchasing.

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282604
Share on other sites

Paid top price for my 33 through them.

Had to go back twice for majour warranty repairs, both times the repairer tried to sell me on extras and both times the repairs were not carried out to satisfaction.

That being said they gave me a lot more for my trade-in than I was expecting, and the guys provided great pre-sales service and reasonable after-sales, car was presented very well and I suspect it had a cheapo respray after landing here which is now starting to flake in some spots, although I can't say for sure that was thanks to Redline.

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5283550
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...