Jump to content
SAU Community

Recommended Posts

I have joined the yellow sticker club :Oops:

Went through a booze bus in Williams Rd, Toorak - was asked to wait at the end of the queue by the blue XR6 TMU candy-car. I blew a big fat 0 on the breath-test BTW.

They did inspection (I was the only car to be stopped). Pods OK as they are caged and secure. Intercooler OK as it is standard. Blow-offs OK as they are standard. Ride-height, rim size, gauge mounting, exhaust noise... all OK.

EPA letter coming as I have an EBC. Thanks for that.

Better check my cat is working OK :rolleyes:

But oh. What's this...

My new tyres (Sumitomos - less than 5,00km old) have a weight compliance index of 93. The ADR compliance for a GTR says they need to be 94. That and my steering wheel doesn't have a padded centre.

I went to Bob Jane this morning (who recommended, supplied and fitted the tyres) who were very apologetic - and hadn't EVER had this come up before. A look on their catalogue showed all 265/35/18 tyres are rated at 93. Even $750 a corner P-Zeros.

While we were looking, the officer who booked me popped in to check and see if he was correct in his findings? Seems that the 93 rating is very high - why the car required 94 he wasn't sure. Too late for me though - got my defect sticker.

Seems that the only way to get 94 or greater rated tyres is to change sizes, which then compromises the factory-stated rolling diameter, which could lead to rubbing on the guards at full-lock - DEFECT, or not complying to the vehicle standard (upsetting speedo readout etc) - DEFECT. Glad to see these laws have been well and truly thought out.

So... Bob Jane have admitted fault and are going to replace my tyres as soon as they find something suitable. Either way - my car has to be off the road after Friday arvo (they only gave me 3-days to fix). So I'm a bit annoyed.

Something to be aware of I guess...

Oh - and my Momo Millenium wheel never came with a centre-pad and is ADR compliant. I have a legal notice from Auto-Tek (Momo distrubutor) stating so. They also have NEVER had this come up before.

What a waste of time.

Out of interest - what weight rating do people have on their tyres? What does the sticker (drivers door-jamb) say is required. Am I just using an unlucky rim size?

Worth noting too - that I still recommend Bob Jane in Prahran. They've been very good about this. Even the cop was surprised - that's where they take their cars.

Link to comment
https://www.sau.com.au/forums/topic/32555-a-defect-for-defects-sake/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Yeah, its about time a few of these common things are thrown out, because most of the time they're not actually illegal - and therefore invalid defect which you *shouldn't* be paying.

When you get it all cleared Jamez, you should write a note to the police superintendant or something. Clearly you have *evidence* to suggest ADR items are being defected and that it neeeds to be passed down the chain of command that "padded steering wheel" and the good old "h pattern not displayed" are complete rubbish and NOBODY should be getting defected for these items.

Weight rating? ha, i barely know what it even is! and i don't think i *have* any stickers on my door jambs anymore, funny that..

FYI James mine are 65 - but they are 265/45/18 not 35's. No idea of what the requirement is.

Sounds like you got someone that had just finished reading the complete rule book on legal requirements and wanted to impress someone with his knowledge!

i drove past that boose station going the opposite direction going home after a yarra blvd run....

i crapped my dacks as all the cops followed my car with their eyes, one of em radioing something into his mic

just hope he wasnt taking my details down for an EPA letter :) i was going "suspciously" slow and whats worse is it was uphill :rolleyes:

Cheers guys.

Snowman: Thanks for that. What brand are yours? Not sure if a 45 profile will be too tall though.

GTT-R: Mine are 650kg. Every other 265/35/18 is 650kg. So silly.

James: Was I there when you went past? Was about 9.00pm

I asked him about how to get the defect removed for the steering wheel - he said to show the Momo catalogue to VicRoads to show it never was padded, and I'll be fine. So why defect me on it in the first place? To prove what? Such a waste of time.

Worst thing is the sticker. So embarrasing having it on the car - especially for something I didn't really do. I bought new tyres - even had an alignment last week. I would have assumed they were OK...

Oh - and my Momo Millenium wheel never came with a centre-pad and is ADR compliant. I have a legal notice from Auto-Tek (Momo distrubutor) stating so.

They may be referring to the fact that yor car is supposed to have an airbag in the steering wheel.

EPA letter coming as I have an EBC. Thanks for that.  

Better check my cat is working OK

Hopefully it will just for the noise and not for the emissions.

FYI, a full factory exhaust doesn't pass the EPA niose test.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...