Jump to content
SAU Community

Recommended Posts

A few of us are going for a bit of a drive on the 7th of feb, and I thought I'd see if anyone wanted to tag along.

We usually do these drives fortnightly, and get a good crew together, with cars of all sorts, like Reanult Clio Sports, Pug GTI's GTR's and WRX's all having a bit of a thrash. Its really good to see how each car comes into its own in different circumstances.

We usually get the map out on the day and decide where to go, usually meet at lillydale, and head off from there eg- reefton spur, toolangi, my baw baw, mt donna buang, christmas hills etc..

What you WILL need to know is, we dont ***** foot around, this is not a leisurly cruise. If you want to test your cars handling abilities, this is how to do it.

If you want to come, make sure everything on your car is up to scratch, especially, tyres, suspension, BRAKES, steering etc.. I cant STRESS this enough, we've had a few people come along and have completely written thier cars off becuase they werent properly eqipped.

We dont do anything illegal, just use the roads properly.

If your keen, and feel up to it, let me know.

Cheers.

ex

Link to comment
https://www.sau.com.au/forums/topic/32557-twisties-sat-feb-7th/
Share on other sites

im up for ANYTHING related to that...

maybe this should go in that 'other' section around here... on the forums... somewhere... i dunno where it is... umm... you get the idea.

PM me if you dont have the foggiest of what im talking about.

But i dunno about the 7th :D

Car will be on the road around that time. I just dunno what day. Playing it by ear.

If not, the following hammer... which incidentally will end up being the GOR i think :(



  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...