Parts Thread

[Sidewinder]

Hey guys, Wanted to add; R32 interior gear and handbrake boots don't fit the a31. If anyone is willing to lend me their Manual vin number, I can get the part numbers from TAARK (ns.com) and post them up? Mine's a convert auto>man so the numbers obviously don't match up.

[mikie]

Dixcel part numbers for A31 rotors front and rear, available on yahoo auctions japan, Acre also do rotors but only front.

Someone may need to talk sweet to the guys at import monster to get a batch landed

Cheers Mike

Edited July 19, 2012 by mikie

[Dan_J]

ceffy brakes are crap anyway, only slightly bigger then s13 ca18det/ sr20de brakes

if your gonna go the effort for new rotors may as well run front s13 brakes sr20det brakes( same as r33 N/A) and r33 n/a rear brakes if you plan to clear 15"s

then again nic says 20e to 20det brakes are all the same, part numbers up top do differ for det

no dimensions for the det front rotors anyone?

Edited July 22, 2012 by Dan_J

[Dan_J]

VL speedo cable fits well, it doesn't mount on the dash frame like the r32 one. you need to fit the cluster input first, mount the cluster and then the input for the gear box due to the way it mounts on the cluster.

the cone for the cluster input fits tightly on and then you shimmy the cluster back while trying to push it back on an angle to mount it

think it will last me longer then the r32 unit as i've gone through 2 already

[krishin]

c33 laurel front reo bar?

anyone know if they bolt up to a31

thanx chris

[Nic_A31]

They can but they leave a ~2" gap between the top of the bar and the cefiro lights/grille etc, because the laurel headlights and grille are bigger.

Might be able to redrill the reo bar to sit further up.

[krishin]

Sweet as that should be pretty easy

Cheers bud

[trxbal]

Hey guys anyone know what other exhausts have the same hangers as a series 1 a31 hoping to run twin 3 inch straight pipes

[Nic_A31]

None. R33 length and angle is closest according to Toffy (blame him if that's incorrect, not me)

There's a dude on DriftWA that makes them, check it out.

[trxbal]

Cheers nick

[toffy]

They are the same shape (33) but the hangers are in different places

[raZ1911]

Anyone know what type of bulbs for a C33?

[raZ1911]

As in for HIDs not normal ones.

[Nic_A31]

The Laurels use a single H4 (3-pin) on each side

[raZ1911]

Thankyou!

[Aubrey107]

i need a new aerial for my a31, is there a different car that i can take the aerial from. which will plug/bolt straight into the a31?

[DannyC33]

In reference to the s13 rack needing modification to the pinion housin.

Is it as simple as unboltin it and swappin it for the laurel/ceffy housing?

Rack in my laurel is shot and I'm struggling to find a replacement.

[Jswljones]

Just to add to the list F31 A/C condensor Fit perfectly

Check my build thread out for pictures

[jamind]

yeah i know they fit on the front but its the rear that i wanna know.. im assuming its a r32 rear strut brace that fits cos the bolt holes are more square if u know wat i mean...

Hi Yeh R32 GTR,GTST, GT-4,Cefiro, Cefiro SE4, ALL Rear strut braces fit each other, My Cefiro SE-4 Front strut brace is the same as R32, GTR, GT-4, Cheer's Jamind

[NZa31]

Hey guys just discovered that cef s1 bumper lip does not fit s2 bumper, I would put photos up but don't know how. Cheers