Jump to content
SAU Community

Recommended Posts

Hi guys,

I'm putting my car in the Warrnambol drags on Feb 8th, and was after a few tips from those who have dragged before (rpm launch?, etc)... Was also after a rough estimate on what time I should get, here's what I've got;

95 R33 GTST

FMIC

3" Full turbo-back exhaust (heat wrapped)

boost controller will be set to 15psi

loaning a set of 17" semi-slicks for the day

stnd suspension

k&n panel filter

Will also have new Apexi SAFC & bov by then too. Car will be dyno'd and tuned.

Link to comment
https://www.sau.com.au/forums/topic/32562-advice-on-dragging/
Share on other sites

after a few tips from those who have dragged before (rpm lunch?, etc)....

I suggest about 5000-5500rpm and slip it off the line with a little controlled wheelspin...

As for lunch, I recommend a light proscuitto, pecorino and rocket salad drizzled with truffle-infused extra-virgin olive oil with a nice glass of 1981 Penfolds Members Vintage Reserve Pinot Noir to cleanse the palatte.

95GTST,

The conditions (track surface/temp etc...) on the day/night will dictate what launch rpm works best. Your clutch will also be a big factor in how best to get your car off the line. Merli's suggested rpm & technique is a good way to go. Very harsh on a stock clutch though.

As for predicting how you go? I'd be happy with mid to low 13's (~105-107mph) with your current mods.

No no no Andrew you've got it all wrong. He actually wants to know how fast to eat his lunch (rpm lunch) kind of like a bites-per-minute sort of thing ;)

As for predicting how you go? I'd be happy with mid to low 13's (~105-107mph) with your current mods.
If he is using the standard turbo and with semi-slick tyres i'd be aiming for a 13.0-13.4sec pass (thats if the standard turbo doesn't blow up on 15psi).

:Bang:

Dont be scared to practice launches before you go out. A very quiet country road is good for 0-100 practice. The track will be different but if you have never done it before its good to get a feel on what rpm spins or bogs down. My car felt good on the street tarmak but at the drags i was getting massive tramp problems through worn lower control arm bushes and stuffed viscous lsd. When staged i hold the handbrake on dial revs and take up the clutch pedal slack, then engage it on the second last amber light releasing the handbrake at the same time(jap style).Hope you understand lol..

On regular sh1tty street tyres i launch off of the handbrake as described immediately above. On semi's, i've recently discovered that i get better 60' times (consistently 1/10th sec better), by doing a great big smokeshow first - then launching with a small amount of clutch-slip to control the wheel-spin through first gear.

Merli, who can afford the bling req'd to guzzle 1981 Penfolds Members Vintage Reserve Pinot Noir every day?!?!?

Oh and if you have a std computer, good luck laucnhing from 8000rpm. ;-)

Adrian

  • 4 weeks later...

hahaha i might be able to 8000rpm, but fat chance ill do that.

i leaunch mine at about 3500, but i hold it at 2500 at the staging lights till it starts to drop then as soon as it gets to the 3rd light down i give it half throttle and start slipping the clutch out pretty fast while moving my right foot fully to the floor, which pretty much makes it 3500 at time of clutch biting.

this allowed me to do a 13.550.

stock turbo, stock cooler, cat back exhaust, 11.3psi, 255 wide tyres.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...