Jump to content
SAU Community

Recommended Posts

Hi guys well i got my tune done and im very very very very impressed! This turbo pulls so hard im always stuck to my bloody seat, I got what i wanted, i wanted 251kws at 18psi that was my goal for drifting at the track. This turbo is capable of doing 280kws, Toa from hypegear has the same mods as me with this turbo and he got 300kws+, but i didnt want that! my mods are the usual... Power FC,FMIC,Pod,Stock BOV,splirtfires coils,etc... Thanks to Tao from hypegears and Trent for tunning my car!!

here are some graphs.

geraus1.th.jpg

Uploaded with ImageShack.us

gerausboost.th.jpg

Uploaded with ImageShack.us

its and adjustable actuator 1.4bar one i think, but my greddy profec spec b-II is connected to it... its not doing much.. lol.

With this highflow, it can do 280+ .... .63 raear housing.

Good result there should have some fun now, and yes you will get sick of it and want more ahaha im on 270 for a couple of weeks and am bored now.

300+ from a highflow? with what housings?

good result, looks a little late onto boost tho, what b/c you using?

Its not late onto boost thats just how it is because its a 3576 hi flow, its about right from the estimation Stao gave before on when it hits full boost.

300+ from a highflow? with what housings?

good result, looks a little late onto boost tho, what b/c you using?

Agreed, even with a .63 it should be earlier. GT30's with .82's are on about that (and make 280rwkw/17-18psi)

Not sure how it's going to crack 300rwkw if its 18psi/250rwkw... It's clearly showing a fair bit of restriction.

Good result either way, just need to ensure you keep the RPM's up a bit higher.

Keep that motor serviced well and a sane rev limits :whistling:

Agreed, even with a .63 it should be earlier. GT30's with .82's are on about that (and make 280rwkw/17-18psi)

Not sure how it's going to crack 300rwkw if its 18psi/250rwkw... It's clearly showing a fair bit of restriction.

Good result either way, just need to ensure you keep the RPM's up a bit higher.

Keep that motor serviced well and a sane rev limits :thumbsup:

heheh thanks, its always serviced by me with all the good stuff :whistling:

ahhh sweet thanks for your graphs, i got the same turbo but in .82 and on a RB30. you have just inspired me to finally pull my finger out and put my cam gears on and fix the timing issues because yours is coming on a fair bit earlier even with the RB25. But damn the bang for buck you get with these turbo's is friggen awsome. did you use a VBAND setup also?? I think 1 suggestion for stao would be for them to use a 3" VBAND instead of the 2.5".

Chris

id be playing with your boost control man, my cheapy kkr430 /dsr430 makes 14psi @ 3500rpm , actuator setup to open @ 9psi, gain @ 50%, alot of preload on the internal wastegate.

different turbo, this high flow has a very open rear wheel so the 0.63 does'nt choke it. There is no more respone to be had with a controller or preload... we tried. This turbo with around 20psi will crack the 280-295 rkw no issues.

That should be obvious just looking at the boost graph, any more preload and it will spike too much.

ah sorry mate I just re read that yours has been put into a highflow. Thats awsome, mine is a complete new turbo that Stao made up for me. V band is like a pipe clamp flange on the exhasut housing, instead of using a 6 bolt flange like nissan use on the turbo.

regards

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...