Jump to content
SAU Community

Wastegate Selection For Gt3076r

trent26

By trent26,
in Engines & Forced Induction

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Oh they have a 45mm again?

Last time i checked (admittadly a while ago) they stopped making the 45mm ones and went to 48mm or something like that.

Going back 6 yrs now mine was a 45mm progate - so the 45mm item should be perfectly fine

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Make sure you get extra springs.

I remember when mine came it only had a 10psi spring combo in the box

I needed to get extra springs ordered in to get it holding 16-17psi consistently :cool:

Given you want the gate to set as close to the desired boost as possible etc. Less change of gate creep which i had using a 7psi spring (and trying to run 17psi lol).

Soon as the springs were changed out it was all spot on.

GTScotT Grand Master

GTScotT

Posted
Posted
Turbosmart 48mm would be a good choice, or anything around the 45-48mm marker.

Same as what i ran with a GT3040 (550-600hp)

Out of curiosity what did you make RWKW from that setup

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

270rwkw @ 16-17psi

369rwkw @ 24psi (sunoco104, i could run approx 8-10 degrees extra timing across the entire map, venting gate etc)

The 3" exhaust i had @ the time was terrible and holding it back on PULP with the gate plumbed in as well :/

Wish i had the exhaust i have now. Would have seen around 300-320rwkw on 20-22psi, perhaps even a tad more as it made 250rwkw @ 1bar.

Given we have E85 around, you could probably add another 40rwkw to whatever figure as well. Would have been interesting :cool:

GTScotT Grand Master

GTScotT

Posted
Posted

Nice, definitely interesting results.

Although I am far from an E85 fan boy, but I am one of few and as we know majority rules :cool: So ill can it right the

Similar to you, exhaust is my current dilemma. I dont want to change away from what I have although have intention to lean as hard as I can on a fairly basic setup. I want to set a reference point for the turbo really.. Unit is an off the shelf 3037, .87 rear, 80mm surge cover.

I see you refer to your results often, although have been yet to find them in the dyno threads. Thanks for sharing.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Never got a chance to upload the 369rwkw run as that was from Autosalon & never got a print out (you can see it on youtube tho)

The 270rwkw run i think i have a sheet for somewhere. I'll have a look. Was what... 5yrs ago now so not entirely sure! :cool:

Sorry for hijackings :/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • MBS206
      Hi everyone.

      By MBS206 · Posted

      I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...