Jump to content
SAU Community

Recommended Posts

a lot of missinformation in that thread.

the compression ratio is the same between the neo and older rb25's.

turbo is different. head has solid lifters and different cams. intake manifold is a better design.

rods are suppose to be GTR rods.. but ive never yet had that confirmed. pistons are the same as is the block.

one has 206 kw . one has 184 . nuff said .

what exactly do you want to know ?

lots of random stuff

neo head has bigger exhaust valves than gtr, combustion chamber is a lot smaller , top feed injectors , new cas . no coil bracket . coils bolt straight to head . takes gay lil oil filter . has bigger exhaust housing on turbo .

RB25DET NEO runs hot burn technology, basically the gases burn at a higher temp which causes less emissions-not sure how that works but it does-closer to EU standards

Which is why the Neos seem to have an 80-82deg thermostat as opposed to the earlier 76.5deg ones.

one has 206 kw . one has 184 . nuff said .

You do realize that the above information is irrelevant dont you? That 22kw would be like pissing in the wind for the R33 motor to make with the most minor of changes to the ecu.

As per OP, major differences with the neo is the head and intake. The neo head has a smaller dome in the and will not work with such things as RB26 pistons etc. The intake manifold is said to be more efficient and uses top feed injectors which are cheaper to outsource.

End result of similarly modified motors is relatively similar :cool:

a lot of missinformation in that thread.

the compression ratio is the same between the neo and older rb25's.

turbo is different. head has solid lifters and different cams. intake manifold is a better design.

rods are suppose to be GTR rods.. but ive never yet had that confirmed. pistons are the same as is the block.

Pistons are definately N1 so they are not the same. Oil pump is a N1 with a small crank collar.... can't remember rods.

bit off topic. but i didnt realise the r33 and r34 gear boxes were a bit different. i got this from a nissan review of thr r34

quote.

Shot peening is applied to the first, second, third and fifth gears of the manual transmission for improved strength and durability to accommodate the higher engine torque. A double cone synchronizer is also provided in the first gear position, in addition to those previously used in the second and third gear positions, for smoother, easier shifting. Moreover, a pull-type clutch for easier operation has been adopted in the manual transmission on turbocharged models.

I don't know the full history of my engine, it has about 120 000kms on it. It had a genuine head gasket, bearings and timming belt in it So it doesn't look like the engine has been pulled apart.

I realise the difference between the pistons, my pistons have the thinker top ringland. (should of said N1 type pistons)

Also is "n" with a single dot above it are the markings for N1?Because my oil pump also has this marking.

I could be wrong.... would be keen to hear from someone who has actually pulled a Neo apart.

I'll be able to throw up a few pictures on here in a week.....

Edited by aleks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...