Jump to content
SAU Community

Kts 6 Pot Brake Setup

Roy
 Share

Recommended Posts

Roy Grand Master

Roy

Posted
Posted

I grabbed these because they were cheap and they are Endless copies. Never really planned on using them, just curious to take a closer look at them.

They came out around the same time as the HKS/Endless jobbies. They appear to be identical to the VTTR 6 pot setup, Central 20 Setups so seems there are plenty of people re-badging the same brakes out of the same factory. Though i doubt they are from teh same factory as Endless as the quality does not appear to be comparable

These are an ex demo set that have been on display, I grabbed them because I was curious to see how good a setup they were for the money. My mechanic looked them over and said they are decent enough and comparable to the G4/D2 things. Being a copy of the Endless calipers pads etc shoudlbe easy.

They come with calipers, mounts, lines, pads and 2 pce rotors which i understand are 332x 30. They could be 330x30mmmcant say as I have not measured them up. They are suitable for R32/33 GSTts and S13/14 and 300ZX. Unused, not even bolted to a car and still in packaging

Will see if I can arrange someone to take pics of the setup for me

Asking $1650 + delivery. $1,600 if you can do pick up

Link to comment
https://www.sau.com.au/forums/topic/326788-kts-6-pot-brake-setup/
Share on other sites
  • 1 month later...
Roy Grand Master

Roy

Posted
  • Author
Posted

Will be posting pics any day....after having a close look at them they seem like good things. Caliper and rotor assemly seem nice and light and well made. I am now thinking about actually using them as they look easily comparable to the G4 etc setups comign out of Asia somewhere, and I can see why VTTR and Central 20 etc are using them. I am guessing they are Taiwanese and originally made by VTTR.

a4-2-2.jpg

a4-2-3.jpg

0080000000022.jpg

The ones I have for sale are silver (caliper) with slotted rotors, with lines, mounts and pads. Bolt on

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...