Jump to content
SAU Community

Recommended Posts

Hi guys, recently had a R34 GT-V skyline go in for inspection in anticipation to buying.

Came back with positive results, thought i'd share them:

r34results.jpg

Uploaded with ImageShack.us

r34results2.jpg

Uploaded with ImageShack.us

Just a question concerning Steering Rack, it is noted that free play is evident.

Also steering pull tends to drift to the left.

How would I go about fixing these problems?

Any comments are appreciated, extremely excited about the car

Link to comment
https://www.sau.com.au/forums/topic/326791-r34-skyline-inspection-report/
Share on other sites

check and ask a mechanic

they sound like basic normal issues to me and most related to wear and tear

i mean some of the reports you get pick up every bloody single issue

and dont focus on the basics, ie engine compression, engine health, and pick out little things like dirty caps etc when more important things could be checked

I've heard there are many other checks that is better than the RACV one. State Roads is one of them.

Also, wouldn't be a bad idea to take it to a mechanic that knows lots about imports, especially Skylines.

use it as a baseline and ask a mechanic workshop (print out the list) to check over them

when i had my ECR33 checked it had 2 pages of little shit and issues

the car had 58,000 on the clock and still going strong with 223,000

so check the specific detail of each item and clarify what they mean

from your report the brake pad issue and keyless entry stand out

the rest seem normal. i mean what 1999 car that is 2nd hand isnt going to have some level of scratches, minor wear/tear and refinishing evidence

An RACV test is not worth wiping your arse with.....i wish people would stop giving money to those (unts

Oh I see what you did there :blush:

When it comes to anything more complex than a Falcon or Commodore I can only echo your sentiments. I have only heard good things about state roads and it seems $500 is a small amount of money to part with to avoid years of pain and thousands of dollars in potentional repairs.

Oh I see what you did there ;)

When it comes to anything more complex than a Falcon or Commodore I can only echo your sentiments. I have only heard good things about state roads and it seems $500 is a small amount of money to part with to avoid years of pain and thousands of dollars in potentional repairs.

I don't think it's $500..... In the other thread, people have stated $250-350 :D

An RACV test is not worth wiping your arse with.....i wish people would stop giving money to those (unts

+1 for the above

I had a stateroads inspection done on the wifes car before purchase....can't remember the exact amount but wasn't over $250. Very happy with the detailed inspection and would highly recommend.

Stateroads is excellent. My mate had an R34 looked at and not only did the guy know everything about cars (obviously), but Skyline specific too. He could tell that the gearbox had been poorly rebuilt and that it was missing some factory seal (can't remember what it was).

Hey guys so i've considered everything and am going to go ahead and purchase the vehicle.

Where would I take it to clear up the problems now and possibly in the future?

SE suburbs btw

Edited by MaddehZ
When it comes to anything more complex than a Falcon or Commodore I can only echo your sentiments. I have only heard good things about state roads and it seems $500 is a small amount of money to part with to avoid years of pain and thousands of dollars in potentional repairs.
I had a stateroads inspection done on the wifes car before purchase....can't remember the exact amount but wasn't over $250. Very happy with the detailed inspection and would highly recommend.
Stateroads is excellent. My mate had an R34 looked at and not only did the guy know everything about cars (obviously), but Skyline specific too. He could tell that the gearbox had been poorly rebuilt and that it was missing some factory seal (can't remember what it was).

+1 for http://www.stateroads.com.au/ , I got my R34 GTT inspected by them before buying it a month or two ago. It's not cheap though at $289 for the comprehensive inspection but you will know heaps more about what you're buying. I also got a quick second opinion by the workshop that did the roadworthy and then took it to Chasers to address one tricky issue.

MaddehZ your RACV inspection report doesn't look too bad provided that the inspector wasn't completely clueless, IMHO. Have a look at the Local Wreckers And Workshops thread for a knowledgeable workshop near you to get that stuff sorted.

The car is from power road, and no the racv check was kind of the decider for me as to whether it was a go-er. Wise choice ?

I've heard good and bad from them and I've been there a few times for myself or for friends. But I still reckon RACV shouldn't be the decider, but a proper mechanic. That's my very honest opinion :cool:

If you are spending that much money on a car, you might as well do everything within your budget to make sure everything is okay, instead of buying it then realise it's a lemon :rolleyes:

steering play in a skyline is usually basic stuff (quite common), non issue really, even if worse case it was bounced off a gutter and the rack was US then your only up for a max of $500 fitted anyway. Id say rack mount bushes or tie rods are slightly worn.

To the people saying it's not a thorough inspection based on this fault report...seems to me they've only listed what is wrong with the car (the important part) and not what is fine with it. If it's a well kept car then the fault report isn't going to be very extensive. I'm sure the actual inspection had a hundred more variables to check for than what they listed on the faults report. I guess they could have been more specific with the source/cause of the problem and a possible fix for it but that's your mechanic's job.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...