Jump to content
SAU Community

Recommended Posts

Hi guys, recently had a R34 GT-V skyline go in for inspection in anticipation to buying.

Came back with positive results, thought i'd share them:

r34results.jpg

Uploaded with ImageShack.us

r34results2.jpg

Uploaded with ImageShack.us

Just a question concerning Steering Rack, it is noted that free play is evident.

Also steering pull tends to drift to the left.

How would I go about fixing these problems?

Any comments are appreciated, extremely excited about the car

Link to comment
https://www.sau.com.au/forums/topic/326791-r34-skyline-inspection-report/
Share on other sites

check and ask a mechanic

they sound like basic normal issues to me and most related to wear and tear

i mean some of the reports you get pick up every bloody single issue

and dont focus on the basics, ie engine compression, engine health, and pick out little things like dirty caps etc when more important things could be checked

I've heard there are many other checks that is better than the RACV one. State Roads is one of them.

Also, wouldn't be a bad idea to take it to a mechanic that knows lots about imports, especially Skylines.

use it as a baseline and ask a mechanic workshop (print out the list) to check over them

when i had my ECR33 checked it had 2 pages of little shit and issues

the car had 58,000 on the clock and still going strong with 223,000

so check the specific detail of each item and clarify what they mean

from your report the brake pad issue and keyless entry stand out

the rest seem normal. i mean what 1999 car that is 2nd hand isnt going to have some level of scratches, minor wear/tear and refinishing evidence

An RACV test is not worth wiping your arse with.....i wish people would stop giving money to those (unts

Oh I see what you did there :blush:

When it comes to anything more complex than a Falcon or Commodore I can only echo your sentiments. I have only heard good things about state roads and it seems $500 is a small amount of money to part with to avoid years of pain and thousands of dollars in potentional repairs.

Oh I see what you did there ;)

When it comes to anything more complex than a Falcon or Commodore I can only echo your sentiments. I have only heard good things about state roads and it seems $500 is a small amount of money to part with to avoid years of pain and thousands of dollars in potentional repairs.

I don't think it's $500..... In the other thread, people have stated $250-350 :D

An RACV test is not worth wiping your arse with.....i wish people would stop giving money to those (unts

+1 for the above

I had a stateroads inspection done on the wifes car before purchase....can't remember the exact amount but wasn't over $250. Very happy with the detailed inspection and would highly recommend.

Stateroads is excellent. My mate had an R34 looked at and not only did the guy know everything about cars (obviously), but Skyline specific too. He could tell that the gearbox had been poorly rebuilt and that it was missing some factory seal (can't remember what it was).

Hey guys so i've considered everything and am going to go ahead and purchase the vehicle.

Where would I take it to clear up the problems now and possibly in the future?

SE suburbs btw

Edited by MaddehZ
When it comes to anything more complex than a Falcon or Commodore I can only echo your sentiments. I have only heard good things about state roads and it seems $500 is a small amount of money to part with to avoid years of pain and thousands of dollars in potentional repairs.
I had a stateroads inspection done on the wifes car before purchase....can't remember the exact amount but wasn't over $250. Very happy with the detailed inspection and would highly recommend.
Stateroads is excellent. My mate had an R34 looked at and not only did the guy know everything about cars (obviously), but Skyline specific too. He could tell that the gearbox had been poorly rebuilt and that it was missing some factory seal (can't remember what it was).

+1 for http://www.stateroads.com.au/ , I got my R34 GTT inspected by them before buying it a month or two ago. It's not cheap though at $289 for the comprehensive inspection but you will know heaps more about what you're buying. I also got a quick second opinion by the workshop that did the roadworthy and then took it to Chasers to address one tricky issue.

MaddehZ your RACV inspection report doesn't look too bad provided that the inspector wasn't completely clueless, IMHO. Have a look at the Local Wreckers And Workshops thread for a knowledgeable workshop near you to get that stuff sorted.

The car is from power road, and no the racv check was kind of the decider for me as to whether it was a go-er. Wise choice ?

I've heard good and bad from them and I've been there a few times for myself or for friends. But I still reckon RACV shouldn't be the decider, but a proper mechanic. That's my very honest opinion :cool:

If you are spending that much money on a car, you might as well do everything within your budget to make sure everything is okay, instead of buying it then realise it's a lemon :rolleyes:

steering play in a skyline is usually basic stuff (quite common), non issue really, even if worse case it was bounced off a gutter and the rack was US then your only up for a max of $500 fitted anyway. Id say rack mount bushes or tie rods are slightly worn.

To the people saying it's not a thorough inspection based on this fault report...seems to me they've only listed what is wrong with the car (the important part) and not what is fine with it. If it's a well kept car then the fault report isn't going to be very extensive. I'm sure the actual inspection had a hundred more variables to check for than what they listed on the faults report. I guess they could have been more specific with the source/cause of the problem and a possible fix for it but that's your mechanic's job.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...