Jump to content
SAU Community

Recommended Posts

On 21/08/2016 at 10:20 PM, R377 said:

The 255/40 and 285/35
FOUND OUT THESE WHEELS ARE Rays Gram Lights 57 Extreme Wheels  Great look for v36 sedan
 Wheels are 19x10.5 +43 all around with a 5mm spacer up front to clear the arms.

xxx.jpg

xxxxx.jpg

 

57xtreme-3416.jpg

Trying to work out sizes and offsets available for as website is limited

RAYS GRAM LIGHTS 57XTREME

https://www.rayswheels.co.jp/products/wheel.php?lang=en&wheel=57EX_SP

19x10.5 +12    +25    +35   +43

19x9.5 +12   +25   +35    +43

Wedssport SA55  all 10kg in 19"

19x10.5 +15   +24

19x10 + 40

19x9.5  +15   +24

19x9   +38    +45

Wedssport SA15

19x10.5   +45   +35   +25  - 9.8kg

19x9.5   +45   +35    +25   - 9.5kg

then 8.5 inch

  Weds Wheels - Wedssports SA-15R in GBC (gloss bronze clear)
FRONT: 19x9.5" +25
REAR: 19x10.5" +45
Michelin - Pilot Super Sport
FRONT: 245/40ZR19
REAR: 275/35ZR19

Air Bag suspension

 

 

ii.jpg

iii.jpg

iiiiii.jpg

iiiiiiiii.jpg

ii.jpg

iii.jpg

iiiiii.jpg

iiiiiiiii.jpg

iiiiiiii.jpg

iiiiiiiiiiiiiiiiiiii.jpg

Edited by R377
  • Like 1

 

Wheel are Advan RS-D 19x9 +25f and 19x10 +25r. Tires are 225/45/19f and 245/40/19r so they are stretched.
 

 

Yeah I tried to fit the 275/35/19 in the rear but it the fenders were eating the tires even with -4.5 camber. I didn't want to pull the fenders so I decided to stretch instead. With the 245s I am getting away with -2.3 camber.

e5.jpg

e6.jpg

Wheel Brand & Model: VMR V702
Wheel Size/Offset: 19x9.5 +33 (square)
Tire Size: 245/40/19 (square)
Suspension Modifications: Ksport true type coilovers, front fender height about 26". Front camber -1.8, rear camber -2.8.

Looks great from the rear (no homo).  Not overly aggressive, would not need a camber kit to fit these wheels.

e16.jpg

e17.jpg

e18.jpg

Forgestar F14 wheels 19x9 +32 19x10 +40 in gloss metallic silver. Wrapped in 245x40 and 275x35 PSS.
Clears Big Brake Kit by about half an inch

Suspension

I am set up on KW coils set at about 26.25 floor to fender, SPC front and rear. Running about -1 in the back, may increase it just a little bit, but fitment is just about spot on.
 

e20.jpg

e21.jpg

e22.jpg

e23.jpg

On 23/08/2016 at 8:22 PM, R377 said:

Velgen VMB5's wheels for v36 skyline sedan
20x9"F +30 offset with 245/35/20
20x10.5"R +45 with 285/30/20

mmm.jpg

mmmmm.jpg

 

Found some more photos   285/30/20 Hankooks on my 10.5" rears

f19.jpg

f20.jpg

7 minutes ago, R377 said:

front 9.5 +12 w 225 and rears 19x10.5 +22  w 255 on my sedan rears, was pretty low where it sat fender to lip on wheel, tucking tire and was running -5 camber. air bag suspension

f74.jpg

 

Edited by R377

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...