Jump to content
SAU Community

Recommended Posts

Hey Gents,

My car a 32 GT-R will soon be back on the road and am looking at getting it somewhat ready for trackwork.

Just interested in what various people are using steering wheel wise, pro's and con's of various types recommendations etc, because at the moment I dont really know whats out there available for me :)

I bought the car with an Isota steering wheel :) the thing is hideous and besides being horrible to hold, detracts from the otherwise sexy interior.

Cheers,

Mitch.

Link to comment
https://www.sau.com.au/forums/topic/327178-steering-wheels/
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

I have a deep dish OMP wheel which I like because it gets the wheel off my knees. I find that for my best seating position on the peddles, I need to reach for the wheel just a bit and my knees are too close to the wheel.

I have been looking at wheels a bit lately and found these on Just Jap. I haven't tried them but the look good for the $$$. I have heard there pretty good but like I said, I haven't seen or tried, yet.

http://www.justjap.com/store/product.php?p...=283&page=1

Link to comment
https://www.sau.com.au/forums/topic/327178-steering-wheels/#findComment-5324428
Share on other sites

One thing to be wary of from my experience is size. I made the mistake of opting for a smaller diameter wheel than what came standard on the car and it was horrible to drive with so had to replace it. But I now use a Sparco suede wheel (with gloves) and it does the job nicely.

Link to comment
https://www.sau.com.au/forums/topic/327178-steering-wheels/#findComment-5324450
Share on other sites

We bought one of that JJR wheel for the budget GT4 build Noddy and it was quite good. Sent it back though as it was just toooooo dished for our application.

We tried various others from JJR, but that particular suede wheel was the only one we couldn't twist into a pretzel just by staring at it.

And yes, as the Snow says, don't go too small, most people do because they think it's "sporty". It also important that you can still see the dash gauges.

Edited by Marlin
Link to comment
https://www.sau.com.au/forums/topic/327178-steering-wheels/#findComment-5324455
Share on other sites

I prefer a smaller wheel. 350mm is legal but feels too big to me - except in the Patrol lol. I've had a 330mm Sparco (think its A Sparco Ring) thats been on my last 4 cars now. Can still see the gauges. Its a personal preference.

I don't like big dished wheels in modern cars. You certainly don't need one in a 32GTR with the telescopic column.

I had a leather version of that JJR wheel - they're a generic cheapie. Mine was GKTech branded. The rim was a bit thin to be comfortable, as was the in-your-face driving position - for me anyway. And reaching forward about 4" to get to the indicator stalk gets old quick.

Link to comment
https://www.sau.com.au/forums/topic/327178-steering-wheels/#findComment-5324652
Share on other sites

yep if daily driven 100% avoid suede. it's only suitable for a track car in which you use gloves all the time. you'll get sick of having black hands all the time otherwise and the thing will just wear out super fast.

One thing that's important to me is the thickness of the rim itself. too thin feels awful to someone like me with fairly big hands. somewhere around 330 or 340mm feels about right to me in a skyline and if you are tall some dish is a good idea to space it back off your knees and get the wheel nice and close to your body. with big hands the gap to the indicator stalks is not a big deal and the extra knee room is a good thing.

brand wise I quite like the nardi's and really like the personal wheels (actually made by nardi too), they have some models which have a nice thick rim. I like the grinta I think it's called in 330mm. I also quite like the kinoshita wheels (KEY!S Racing), great feel but a bit 'out there' style wise with the giant KEY!S RACING logo stitched around the rim.

Link to comment
https://www.sau.com.au/forums/topic/327178-steering-wheels/#findComment-5341980
Share on other sites

You may want to look into the Nardi Deep Corn wheels, which I used to run as well. Very nice wheel, though a bit thinner than the RPM I'm now using.

The 330mm has less dish than the 350 (53mm as opposed to 80mm from memory), so may be a nice option for you.

330:

post-8405-1278979939_thumb.jpg

350:

post-8405-1278980036_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/327178-steering-wheels/#findComment-5343238
Share on other sites

Alot of nice wheels out there, I'm going to see how i can go about getting a Personal Grinta that BeerBaron was talking about, very nice looking wheel for the price, although getting a sparco with buttons and hooking the scramble boost upto it would be a whole lot of boy racer fun :/

Link to comment
https://www.sau.com.au/forums/topic/327178-steering-wheels/#findComment-5344509
Share on other sites

yeah the nardi/personal grinta is a lovely wheel. nice thick rim which makes it nice to hold, two nice little bumps at 10 and 2 where you want them and otherwise a simple round wheel with not much dish. I've had about 3 of them now and generally take them from car to car if/when I change cars. :(

oh, and quality wise they are outstanding. the first one I got second hand in 2002 (on a car I bought). it's since been in 2 more GTRs and my silvia drifter and still going strong with just a tiny piece of sticking loose which surprisingly was already loose when I got it in 02 and hasn't gotten any worse! considering how well they last paying a bit extra up front is good value in the long run.

t_17869.jpg

Link to comment
https://www.sau.com.au/forums/topic/327178-steering-wheels/#findComment-5347608
Share on other sites

for the ultimate jap racing bling check out the KEY!S wheels. http://www.cardome.com/keys/op03.shtml

I'm rocking one in the 33 GTR atm. it sure is 'out there' but feels great and I am a massive wanker anyway so the little stars stitched into the rim don't bother me...

yeah baby.

2008_titl_bg.gif

they do have the pedigree. mines one like this. not suede though.

2008_p7.jpg

Link to comment
https://www.sau.com.au/forums/topic/327178-steering-wheels/#findComment-5347651
Share on other sites

I have an OMP WRC in suede which I love - they do come in smooth leather.

It has a slight dish to it which is fine normally, but now I am looking at a quick release hopefully it isn't going to sit too close.

See http://www.skylinesaustralia.com/forums/Pa...ui-t328473.html

Link to comment
https://www.sau.com.au/forums/topic/327178-steering-wheels/#findComment-5347695
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...