Jump to content
SAU Community

Recommended Posts

Hey Everyone,

I'm after some perspex, I have found a few places around brisbane, But they don't go any thinner then about 3mm and i need about 1mm - 2mm or thinner.

Any yes i have asked around alot.

If anyone has any idea who sells this around that thickness that would be great.

Thanks :whoops:

Mr Plastic

Mat

5/20 Herbert St

Slacks Creek QLD 4127, Australia

(07) 3290 6188

If he doesnt have it in stock he can get it in.

I've been using Mat for all sorts of custom perspex jobs for many years now.

I tried him, but no luck,

Thanks anyway,

Any other ideas?

Cut to Size plastics in Evans Road, Salisbury can supply you with 2mm perspex.. anything smaller you will prob not find..

EDIT: Forgot, their phone number is 3274 3733

Edited by .:: GimpS-R34 ::.

have you tried bunnings? i've seen some in the bunnings at maroochydore, so i would assume ones in brissy would do it too. don't know how thin it went though. might've only been 3mm.

otherwise i think some glass places do it.

they should be able to do polycarbonate.. just call them and ask.. depends on how thick you want the polycarbonate.. i can source some if it is made.. thinest poly i have gone is 8-10mm.. i rarely have a job for it..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...