Jump to content
SAU Community

Recommended Posts

did my diff oil today, not too much problem, bolts were fairly easy to take off..

Read somewhere that the diff takes about 1.9 - 2L.. I had the car on level ground with a hand pump siphon but could only manage to get about 1.5L. I tried pumping more in but it was dibbling out quicker than i could get it in.

Should it still be ok?

Link to comment
https://www.sau.com.au/forums/topic/328114-diff/
Share on other sites

  • 2 weeks later...

Yep it takes about 1.5 - as long as it continues to come out after you've pumped it in then you're sweet :D

Use an 80w90 for a mostly street-driven vehicle, and circa 85w140 for a track car. Does not need to be LSD fluid for a standard viscous GTS-T diff.

Link to comment
https://www.sau.com.au/forums/topic/328114-diff/#findComment-5354352
Share on other sites

what diff oil did you use? i was looking at doing mine soon.

used castrol SAF-XA rear axel diff oil 80w90, took about 1.5L

get a hand siphon off ebay its like 10 bucks, it saves soooooooooooooo much time.

birds - yep it was coming out quicker than i could pump it in so figured it was full

havent really found much difference doing the diff oil - it doesnt shudder as much if anything

Edited by defari
Link to comment
https://www.sau.com.au/forums/topic/328114-diff/#findComment-5357807
Share on other sites

You probably won't notice much, it's not much of a human interaction device like the gearbox where you can feel through your hand the difference between different oils and fresh/old. Also, diff and gearbox oil can last a long time as it is not exposed to much in the way of contamination like engine oil is. Were you just doing a service interval change or were you trying to fix a diff problem?

Link to comment
https://www.sau.com.au/forums/topic/328114-diff/#findComment-5357906
Share on other sites

just a service. Had no idea when it was last done / ever done by previous owners. Got all the oils cheap too.

The GB oil change though has made a difference, although the gb never crunched etc, i did it for the same reason as the diff (wasn't sure when it was last done) The gearbox was getting a bit "whiny" in the first 5mins of driving in the morning - the whining noise is somewhat gone but can still hear it slightly however i noticed the car wasnt as jerky when i was getting on/off the gas. Also the gears just felt more "solid".

Link to comment
https://www.sau.com.au/forums/topic/328114-diff/#findComment-5358234
Share on other sites

:thumbsup::D:) to assuming nothing had been done.

+1

had a charade that was serviced by a reputable shop and the gearbox eventually died, the old fluid came out "like water" the mech told me so it was way past its service interval.

i do my gearbox and diff oil every 40k km, which is what the service manual states

Link to comment
https://www.sau.com.au/forums/topic/328114-diff/#findComment-5364307
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oof, I will forevermore have those shredded gears in mind whenever someone talks about showing mechanical sympathy towards their car. Thanks for the photos, fascinating stuff!
    • Curious to see how the SpeedTek stuff holds up
    • The holdups last year were drivetrain related. I had the car out right after getting the bearing issue resolved. Third launch and the car didn't move after releasing the clutch. It had sheared all the engagement teeth off the 1st gear.    Thankfully no other damage was done. I set an aftermarket gear beside an OEM gear and found that the engagement teeth on the OEM gear were much larger and better supported. Looking through my bin of spare transmission gears I found that there are two types of tooth on the OEM first gears - the larger tooth and the smaller tooth. It looks like most aftermarket gearset manufacturers base their design on the smaller tooth. OEM large tooth left - Speedtek, OS Giken, etc or OEM small tooth right Decided to give that larger engagement tooth a try. Pressed the ring off an OEM gear and sent it to a transmission manufacturer here in the States. They did their "faceplating" operation with my synchro ring on the Speedtek gear.   I reassembled it, took it back to the track and promptly destroyed the gear itself.  I'll rebuild this and use it as a spare - thankfully just first gear and the countershaft are damaged beyond repair. Definitely disheartening but my welded on engagement tooth ring held up!  Moved to Speedtek's dog engagement design as the gears appear to be much stronger. So far they have taken much more abuse at the track. Also scored a Stillway lockout from the Netherands for super cheap. It's for some other RB transmission so it took a bit of fabrication to fit but honestly a very easy job. I also had to heavily modify the gates as they were very different.   Then for some reason at the last test and tune a silicon coupler below the throttle blew off and took out the radiator and fan. Thankfully it was in the burnout box and not down track. This car is really beating me up - I still haven't made a pass in it. Ran it through the gears many times on the street but it keeps biting me at the track.  Currently in the process of replacing the radiator and remaking the throttle pipe to remove the coupler and use a cast 90 and a vband. I WILL get this thing down the track...
    • Covers most of the above points really. There's a few exceptions but most just see driving as an irritating but necessary task they must complete if they want to get anywhere on time. Also see it as a good time to show their awesome multi-tasking abilities on their mobile and/or doing their makeup.  
    • I don't believe I posted pictures of the second oil pump pickup I added so here they are. Data shows it gets oil pressure up to the relief pressure much earlier in the RPM. Is that important? Not likely... This was just another attempt to fix the bearing issues.   I also heavily opened up the inlet to the pump since it now had to flow oil from two pickups. I believe the diameter increased about 1/8".
×
×
  • Create New...