Jump to content
SAU Community

Recommended Posts

hey guys, what oil should i put in my diff? its in an R33gtst, should i use the 80-90 or the thicker 80/90-140? (not sure if its 80-140 or 90-140) also, should i use normal diff oil as apposed to LSD oil? as i beleive the diffs are VLSD and dont necessarily needs LSD oil

any help is apreaciated

cheers

Link to comment
https://www.sau.com.au/forums/topic/328173-80-90-or-8090-140-lsd-or-non-lsd/
Share on other sites

80-140 i would use on a track car, 80-90 for a street/track car. Nissan specifies 80-90 for japanese conditions iirc for rear LSDs

whats iirc? and is that an lsd fluid or normal?

mines a VLSD, would it need special lsd oil or standard gear oil?

Flushed and filled the LSD on both my 33's a couple of days ago with Castrol SAF-XA 80w-140 Full Synthetic Limited Slip Rear Axle Oil. No complaints so far and was told it’s a good oil. I’ve heard that if you have the limited slip diff, you must put LSD oil in or it will not work correctly but you can put LSD oil in non LSDs.

Run everyday 80w90 in your standard R33 GTS-T diff, mineral or synthetic. This will be fine unless it sees alot of track work - in which case you might want an 85w140 or similar. Note that you do not need to use a limited slip oil in a viscous LSD as a viscous LSD uses its own unservicable fluid inside the diff centre to operate. However, using limited slip oil will not do it any harm (aside from most mineral limited slip oils being a monograde 90 - non existent viscosity range).

Only mechanical diffs requires limited slip oil with anti-chatter additives.

Run everyday 80w90 in your standard R33 GTS-T diff, mineral or synthetic. This will be fine unless it sees alot of track work - in which case you might want an 85w140 or similar. Note that you do not need to use a limited slip oil in a viscous LSD as a viscous LSD uses its own unservicable fluid inside the diff centre to operate. However, using limited slip oil will not do it any harm (aside from most mineral limited slip oils being a monograde 90 - non existent viscosity range).

Only mechanical diffs requires limited slip oil with anti-chatter additives.

well i have put an anti chatter aditive in and its still grinding or "chatting" when turning, i cant for the life of me figure out whats wrong with it!

Did you read what I wrote mate? lol :(

You have a viscous diff, it does not need anti chatter additive...hence when you put it in it did nothing :D

Could be a manner of things wrong with it...these are use once and throw away diffs. Buy another one off eBay or put in a proper LSD.

lol do not trust many second hand items on eBay unless it's a solid state business with some impeccable feedback. Great nick is also a subjective use term haha. The plus to it is, if you choose to go with a decent LSD...you can get the centre installed in your spare diff housing while your car is still on the road...that's if you kept the old diff :D

Try Castrol SAF-XA out, if the LSD starts to behave strangly and locks up around a roundabout or in carparks (I heard it happening with Redline Shockproof in the diff, not sure if it was the grade 90w-140 or the fluid itself), just dump the fluid and go a different one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
    • Yes. Autos typically work from the speed sensor on the pinion shaft of the diff. I also think that even if you have a proper speed sensor for the bog manual in the manual box, that the signal it outputs is not compatible with the auto dash anyway. You should consult that manual (the book, not the gearbox).
    • And I just realised that that advice is slightly nonsensical for a GTR, because you need 2 of them. But it is otherwise true.
    • Having had a reasonable look at the car, I'll be able to remove the (one time) rams and retract the hinge (they are held in the down location by a tiny (m3?) sacrificial screw) which will get it physically back in shape. From there if you remove the rams you need a resistor to turn off the airbag light (as Mark said, there are plug in kits and I might go that way because its reversible). And...per all the threads on here, even if you have the resistors to turn off the airbag light, the bonnet light will stay on as it writes to the airbag computer history - that is either replace the airbag controller, reprogam the EPROM (if I can work out how), or remove the globe from the dash. Having seen how sensitive this system is, if I had my time over I'd pre-emptively remove the rams, even on a road car, because this is all a very unnecessary pain in the arse. Reminds me, time to go and have a look at the Fuga too....
×
×
  • Create New...