Jump to content
SAU Community

Hicus Light Pops On After 5 Mins Of Driving

ClutchBurndout-:(
 Share

Recommended Posts

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
Posted

as the title says, i have my hicus still in and hooked up to stock etc, but the hicus light on my dash turns on after 5 mins of driving and dosent turn off unless the car turns off, what would be causing this? and how do i fix it? does the light mean my hicus is buggered?

cheers

PM-R33 Grand Master

PM-R33

Posted
Posted

What was the last thing you did to the car before the light started coming on?

It means it is getting an error of some sort and going into its failsafe mode. You need to work out what is causing the error.

I once had it happen when I shorted the speed signal wire, kept happening. Simply reset the factory ECU (disconnected the battery over night) and hey presto was fine again.

bubba Grand Master

bubba

Posted
Posted

Have you taken your steering wheel off lately? if it's not quite on straight, after a few minutes of driving HICAS will think you're driving in a really big circle and throw up an error..

Does your speedo still work?

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
  • Author
Posted
What was the last thing you did to the car before the light started coming on?

It means it is getting an error of some sort and going into its failsafe mode. You need to work out what is causing the error.

I once had it happen when I shorted the speed signal wire, kept happening. Simply reset the factory ECU (disconnected the battery over night) and hey presto was fine again.

its been doing it since i got it, ill try disconnecting the battery, both terminals?

Have you taken your steering wheel off lately? if it's not quite on straight, after a few minutes of driving HICAS will think you're driving in a really big circle and throw up an error..

Does your speedo still work?

i havnt, but ive had the car for about 3 weeks so i dont know what the last ownder did,but how would it know that the steering wheel is off center? its only alen screws...

speedo is fine!

Munkyb0y Grand Master

Munkyb0y

Posted
Posted (edited)

the way it knows is there's a hicas related clock spring type wheel behind the steering wheel that turns with your steering wheel. so it keeps track of the angle. 'steering angle sensor'

but i dont know why ppl keep saying check if your steering wheel is off by a tiny bit. coz the splines dont allow you to be off by a tiny bit. it's very noticeable if you're off if only by one tooth.

i suggest taking your boss kit off and check that it has the appropriate holes in the back for the steering angle sensor to lock into. also, check that the sensor is still there.

Edited by Munkyb0y
bubba Grand Master

bubba

Posted
Posted

There is a steering angle sensor behind the boss, HICAS uses steering angle and speed input to decide what it's doing. Even one tooth out will freak the system out.. I'm talking teeth of the splined shaft that the boss goes on to, not the 6 bolts that hold the steering wheel to the boss.

bubba Grand Master

bubba

Posted
Posted

The sensor is a big white looking disc thing with two posts standing proud of it... really hard to miss.. as soon as you take the boss off there it is.

But +1 for binning HICAS. You don't have as much of a weight saving in the R33's but I hate HICAS and removing it gave me more confidence in the abilities of the car as opposed to not being entirely sure what the back end was going to do..

Fortunately, my Stagea came from the factory without it :)

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
  • Author
Posted
The sensor is a big white looking disc thing with two posts standing proud of it... really hard to miss.. as soon as you take the boss off there it is.

But +1 for binning HICAS. You don't have as much of a weight saving in the R33's but I hate HICAS and removing it gave me more confidence in the abilities of the car as opposed to not being entirely sure what the back end was going to do..

Fortunately, my Stagea came from the factory without it :)

ok an how is the disc supposed to sit? or am i just making sure its in there?

also, while where on the topic, how hard is it to bin the hicus? is it as simple as unbolting and unpluggin the wires and putting in the bar? or will i need to screw around with the wireing etc, and will i need a wheel alignment? how hard is it? whats involved?

Trozzle Grand Master

Trozzle

Posted
Posted

Mine did this. Would always come on just outside of Sydney on the way back to Canberra, but never any other time....inclusive of the way TO Sydney :S

I personally just pissed it off with a lock bar when I got my suspension etc done, but that's obviously not fixing the problem (unless of course you agree that HICAS itself is the problem in the first place)

nisskid Grand Master

nisskid

Posted
Posted
His is an R33.. I know the 32 will light up the HICAS light if the fluid level is low but doubt the R33 does the same..

yeh i thought it still did as it simply doubled as a hicas/steering fluid warning. im probably wrong, i dont like to meddle in r33 things usually lol

do r33's have a separate warning light for the steering fluid sensor?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...