Jump to content
SAU Community

Recommended Posts

I have the same problem got my line put on a dyno to find out WTF was happening, ends up it's running hell rich and is gutsing up. The solution SAFC or aftermarket ECU. I'm seriously looking at a WOLF plug and play, depends what plans you have for your car.

I will assume you are running higher than factory boost SIR33.

R33 GTS-T's are notorious for having a flatspot in the rev range due to the timing being retarded when running higher boost.

Power FC is your friend.

its starts boosting then when it hits about 3800-4000rpms it reallly struggles, but then after 5000rpm the boost kicks in hard again. standard boost. exhaust. bov and filter.

cheers

I am having a very similar problem, except occasionally after letting off the throttle it starts stumbling really bad and takes a bit to recover as if the MAF is not working properly.

But like your problem, if I stay on the throttle after hesistation it kicks really hard and often spins tires afterwards.

I am using a Techtom MDM-100 to monitor, and it shows that timing is not being pulled and that it is not leaning out. I checked plugs more than once and they are fine and gapped properly. I am only boosting 10 psi MAX.

I am also now running a z32 MAF along with Apex'i S-AFC to try and fix the problem but that is not changing anything.

Very frustrated and do not know where to look next.

Blitz is spot on.

Sir33 you have filter and exhaust, meaning you are no longer running std boost, as due to increasing the flow characteristics you pick up a couple of pounds boost.

I had same prob when i first got mine with the same mods as you, but i had a bleed valve. Mine was more a problem when it was very cold, boost spiked, AFM freaks out and the std ECU pulls back the timing.

Power FC is your very best friend!!! In my opinion if you want to mod change the ecu coz they run SOOO much better when tuned for your mods, even just filter and exhaust. No flat spots, just smooth power all the way to the redline.

I had a similar problem except it was misfiring like crazy. I've got one of those old skool Apexi S-AFC's and whacked the car onto the dyno. Gapped the plugs and advanced the timing ever so slightly - Problem solved. I am running standard ecu 2 as well as aftermarket zorst and filter. I'd be checking what kinda spark plugs you have also if they weren't recently installed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...