Jump to content
SAU Community

Recommended Posts

As many threads will already state - turbo timers are illegal to use in Australia. Just drive slow for the last coupla minutes of the journey and let it cool down. For reference:

ADR 25: Turbo timers are not to be fitted to vehicles manufactured on or after 1 January 1972 (ADR 25 Anti-

Theft Locks). ADR 25 requires that the normal function of the engine only occurs when the ignition lock is in the engine on position.

+1 JRM

mine has it as well, but guess what not hooked up.!!!!. why bother if you can't let you car idle with your butt in it for a min while you get your crap ready , and drive it slower/lower rpm for a few min before hand. easy solution ?

this is true for any car not just turbo's or if could vapour lock and not restart what is vapour lock you ask

my friends volvo non turbo fuel injected 244 used to do it at rush hour when we got stuck behind the train tracks.. sux ass

turbo cars had the bad rap when the oil would burn in the bearing races after being flogged and shut off without proper cooldown. a problem from the 80's first turbo cars. with lame oils , not as common these days with synthetic oils and less emissions crap hanging off engines.

I had the same system hooked up a few years ago, and from what I remember, the TT function is programmable at the time of installation for 30, 60 or 90 seconds.

I have mine on 90 seconds, and you can force it off when you've turned the car off but it's still running by double-pressing "2". I usually do this, and it's no effort. You can force the shutdown whenever you like.. doors open, doors locked, immobilised etc, as long as the ignition is off and it's running from the alarm system.

The whole thing was Insurance approved, and I received a certificate for insurance purposes too. I wouldn't think that there is an issue with a timer built into an alarm/immobiliser, as it can't be overridden like the piggy-back types.

While we're on the topic of this system, (which I rate VERY highly)... I had "unlock" once programmed to unlock both doors, and a second press to pop the boot via a solanoid installed next to the boot release latch (in the boot). This is SO DAMN HANDY. I swear the only key barrel i've used in the last 5 years is the ignition.

Double-pressing "1" will turn all your indicators on. Handy for walking to the car in the dark, or finding it in a parking-lot.

1 and lock will silent-lock

2 and unlock will silent-unlock

Thanx for the reply Steve.

I have booked for the guy to come back to install the auto window thingy so i am going to ask him bout the turbo timer.

I tried the 1 and lock, 2 and unlock and also the double pressing 1. Thanx man. now i can walk into my garage at night without switching on all the lights. Its bright.

any other features you know?

Btw do u have a manual? he didnt leave me one so i cant figure out most of the stuff.

anyways thanx so much for the reply

Appreciate it. :)

Vish.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm thinking that this is such a small part of the problem that you could easily forego the vac pump and just achieve 90% of what you need, which is keeping the gate open when off boost. It's not as if there are not already techniques to keep a gate fully closed under boost. After all, you have boost. Just use a wastegate actuator that will allow you to apply the boost on the appropriate side, just like every external gate out there.
    • Heres another fitment photo. redrilled the pattern to 5x112, and threw my audi´s rims on. had to touch the upper control arms with grinder, because the "sharp corner" was sticking about 2-3mm on the tire path. i have the "fender lip" mostly cut off, otherwise these (too) would contact with it. 20x9.5 ET25 rear    265/30 20x8.5 ET20 front    255/30 they are temporary, and look too big for the chassis. searching for 19s to it.
    • From experience, it will come back to bite you haha.
    • Background: my BMW 225i hatchback (rebodied MINI/X1) came with 3x RE003 and 1x Goodyear Asymmetric something. The RE003 roared and slid around, the Goodyear side was quiet and grippy. Definitely my car was thrashed before it got sent to dealers. My brother also got RE003 all round on his old VA WRX STI, I wasn't impressed with them, car was loud so can't comment on noise. Anyway, Hankook stopped making/updating V12 Evo2. So bought S1 Evo3 runflats. Great daily duties tyre and not that harsh ride. Tyre reviews site/youtube rated them as best stopping in the rain and I believe them. Next set, Goodyear Asymmetric 5 non-RFT. It beat PS4 in tests and is like $100 cheaper, so put them on. Great tyre, more grip then S1 Evo3 but a tad noisier as expected, still rocking them. Next set I am looking to go runflats, probably the new Hankook Evo. Although the new Pirelli PZ5 did well in tyrereviews test. Or go Goodyear Asymmetric 6 which was top tyre last year. The V12 Evo2 on my gen5 Liberty GT wagon did great in cold condition (drove to snowy mountains for a day so my husky can feel his ancestor's roots). Super impressive performance for $120 each lol. Never skimp on tyres, brakes, suspension. There's old pics of my R31's crappy random brake pads bending in the caliper at Oran Park track day somewhere around here. Anyway, my 2 cents.
×
×
  • Create New...