Jump to content
SAU Community

Recommended Posts

can someone recommend for me what is the best oil for my GTT

it doesn't matter how much is the price, i just need to know what is the best to use for my diff and my gearbox and how many liters do i need for each,, thanks to everyone in advanced

btw i am pretty sure that the answers are on the forum but honestly i did a research and couldn't find my answers

yea pretty sure there have been many lengthy threads about this. i've read several of them and the crowd favourite is usually the likes of Redline MT90 or if you have crunchy gears then try Redline shockproof lightweight. as for diffs i'd probably go for the genuine nismo LSD oil. nissan dealerships should usually stock it.

I just put some Castrol Syntrans in my gearbox with some nulon G70 and its made it alot smoother. Its prob not the best, but for the price i think its pretty good stuff

For diff Ive been using SAF-XA i think the stuff is, Castrol as well

Never had an issue

There are prob better oils but if its just a street driven

Gearbox: Grab 4L, youll need most of it

Diff: is about 1.9L from memory

well it is mostly a street car, but it will be tracked probably not more than 3 or 4 times a year. i will get my car serviced for the 100,000 km and i just wanted to use the best stuff since i dont get to change the diff and gearbox oils that often. plus its never a bad idea to use the best affordable things for your car,,, thanks to everyone for the advice.

a quick question guys, i bought 5 liters of motul FF type 2 for my gearbox and diff,, now i realized that i am 0.6 liters short to fill the diff and gearbox with the right amount,,,, i went back to autobarn to buy one more bottle and they ran out and wont get more for like a week atleast and i cant wait ,, my question is can i mix something else with the FF type 2?? if yes what would you recommend and how much should i add in the gearbox and how much in the diff?? i was thinking 0.3 liter in the diff and 0.3 in the gearbox but if someone can advise i will be very thankfull

use the same oil... you cant mix oils its a bad idea

go somewhere else? repco sell motul apparently

thanks for the reply,, i went to repco i think they only sell motul motor oil cause thats all i can see on there shelves, i pretty much went to every store in newcastle and couldn't find any motul FF type 2

what problems did the last batch of redline shockproof have exactly? i just put it in my gearbox today.

Spitting it out of the breather. 3 cars all did the same thing. We even tried extending them to a catch can. They would lose half a litre approx every 20-30kms or driving. Would lose nothing on the track though.

We even tried pulling out a litre to see if it would still do it.....and it did

So we swapped it out for the Motul Gear Competition and problem solved.

I haven't been game to go back to it in case I end up having to wear the cost. No one will replace the batch under warranty for us

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
    • att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
×
×
  • Create New...