Jump to content
SAU Community

The Car Always Going To A Side When Hands Not On The Wheel?

ryan_perth

By ryan_perth,
in Western Australia

 Share

Recommended Posts

ryan_perth Explorer

ryan_perth

Posted
Posted

my housemate's r34 got a problem cause the car not going straight when hands off, it's going to the left.

he brought the car with this problem since 2 years ago.

he changed all new tyres and suspensions, and did a 4 wheels alignment recently, but the problem still don't go away.

the car should not been crashed and don't have any damage on the body.

anyone has any idea what's causing this problem and how to get rid of it?

cheers,

ryan

NISMOGTT Collaborator

NISMOGTT

Posted
Posted

I had a problem with this when i first got my car also until i took it to my mate to align it...

the issue will be the car is aligned straight so the road camber will be throwing it to the left, what you need is some one that knows what their doing to put a slight toe-in on the front left wheel to make it drive straight.

Hanaldo Grand Master

Hanaldo

Posted
Posted

+1 ^

Wait Brad is leaving!? :)

To the OP, could be any number of problems, my mates R32 had the wheels aligned twice by two different places, turns out it needs a camber arm kit. My car used to do it, found the front left tyre was 3psi flatter than the rest of the tyres, pumped it up and problem fixed. Although it still does it on the freeway which leads me to believe it is the camber of the road causing it.

R DIRTY 3 Grand Master

R DIRTY 3

Posted
Posted

Do you have a previous wheel alignment print out??

If you do, get it in your hand and give me a call as there is some info on it im curious about.

(WA Suspensions 9444 0500)

Also, castor rod bushes...have they been changed or are they still standard hydraulic ones?

Camber of the road can and will affect it aswell. No one will ever make the car drive dead straight as our roads are cambered....but it can be made 'better'.

What tyres are on the car? is it a known 'decent' brand? (Bridgestone, dunlop, sumitomo, etc etc) or a cheap china brand like LingLong, Wanli, Triangle?

Just becuase there is no damage to the body does not mean the car has not gone over a kerb at a fair speed. Just for shits and giggles, measure the wheel base left and right (centre of rim to centre of rim)....whats th difference in measurement? 5-10mm can make a differnce.

Hanaldo Grand Master

Hanaldo

Posted
Posted (edited)
Roads have camber ? :)

Yerp, very important factor in road design.

Taken from http://www.arrivealive.vic.gov.au/initiati...rovements.html:

"The camber or tilt of a road can greatly influence a car’s ability to travel safely through a curve. A poor road camber increases the risks of vehicles running off the road. The road’s camber will be improved at locations where it is associated with a high number of fatality or serious injury crashes."

*EDIT* Also what Brad said about water drainage etc.

Edited by Hanaldo
ryan_perth Explorer

ryan_perth

Posted
  • Author
Posted

thanks everyone.

the tyre pressures is good, and they are continental, so shouldn't because of the tyres i think.

i know the road got camber, but even it drive on a really flat surface that every car can go straight, it just can't. :)

he did a 4 wheels alignment 3 weeks ago at WESTATE AUTOBAHN in Newcastle Street, Perth.

we droped the car there and 3 hours later they call my friend siad the car is ready to pick up and it is all good. they didn't point out any thing at all...and the car still going to the left...

castor rod bushes haven't been changed. they can be contributed to this problem as well?

cheers,

ryan

Hanaldo Grand Master

Hanaldo

Posted
Posted

I took my car to Peddars when I first got it for an alignment and 28 point safety inspection, they got all freaked out and flustered working on an import, told me my whole rear suspension setup was f**ked, would need to replace the whole thing, they quoted me $5000 ffs.

Took it to WA Suspension for a second opinion, Brad called me back after about an hour and said it's really not that bad, there was some slight play in the rear sub-frame bushes that could be fixed with some pineapple bushes. Got the work done, ended up costing me about $560 all up.

Seriously, take it somewhere where they know what they are doing (read: WA Suspension).

Stinky Rooster Grand Master

Stinky Rooster

Posted
Posted

+1 for WA suspenders.

Had them knock up an alignment for Teh Fury yesterday, and was forced to stop twice on the way to home so I could get out and roll naked across the bonnet. I dont think the chick at the drive through coffee place will ever serve me again though :P

WA_R32 Grand Master

WA_R32

Posted
Posted

Hmm, turns out that there wasn't enough castor on the left front wheel so we chucked in some castor bushes and she is all sweet, $200 later problem is solved :) if anyone else is having a similar issue feel free to give us a call :(

Dale i got to drive Teh Fury back from Allans CV's, man it was terrible to drive, pulled left like a bitch, all good now though?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Jacks that fit under GTR lips that can reach the subframe?

      By MBS206 · Posted

      You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • Piggaz
      Jacks that fit under GTR lips that can reach the subframe?

      By Piggaz · Posted

      http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • f00stx
      Intro/R33 owner

      By f00stx · Posted

      Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • f00stx
      Second time Skyline owner (R33 GTS-T and now a V36 370GT)

      By f00stx · Posted

      Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...