Jump to content
SAU Community

New Tuning Advances With Cobb Accessport

Martin Donnon

By Martin Donnon,
in R35 GTR

 Share

Recommended Posts

Martin Donnon Mentor

Martin Donnon

Posted
Posted

Thanks to the master of Cobb Tuning and GTR engine management John Banks the R35 operating system has been re-written yet again over the past few weeks :)

After rewriting the entire boost control code to make the GTR management work properly at higher than stock boost (plus a host of other stuff) it was time to program and 'crack' the launch control in the TCM. Now this has been achieved there are some other cool things on offer that put the factory GTR computer (when tuned with an Accessport) beyond the realm of anything the aftermarket have so far dreamed of for these cars.

The first innovation is using the factory big single boost gauge as a 'Knock Light'. Remember the flashing check engine light on the Power FC? The Cobb Accessport tuned GTR computer can now do this, but even better. Check the demo -

When you see the boost gauge flash its an indication that the GTR knock sensors have been alerted to detonation. The computer then rectifies the ignition timing automatically, but still lets you know its happened.

Then there is the intelligent map switching. Your tuner can write 9 different engine maps into the GTR computer with different boost levels, fuel, timing etc. and you can switch between them on the fly using the cruise control buttons on the steering wheel. Look at it in action here -

The possibilities are absolutely endless and the integration is astounding :)

Exciting times are ours :blink:

Cant wait to test this over the next few weeks! :D

Martin HKS Enthusiast

Martin HKS

Posted
Posted

It will be interesting to see what the new HKS V-Pro http://www.skylinesaustralia.com/forums/Hk...ar-t330492.html has to offer in comparison. Is this available in Australia yet Martin?

Cheers

Marty

Martin Donnon Mentor

Martin Donnon

Posted
  • Author
Posted

I am not sure about the availability of the F-Con.

What I do know is that nothing compares with programming the native code in the factory computer.

Now the interface between the MFD and the PCM has been cracked I think the public will be able to look forward to some spectacular innovation.

fungoolie Community Regular

fungoolie

Posted
Posted
I am not sure about the availability of the F-Con.

What I do know is that nothing compares with programming the native code in the factory computer.

Now the interface between the MFD and the PCM has been cracked I think the public will be able to look forward to some spectacular innovation.

That is just amazing what they're managing to do reverse engineering the OS like that. I can see custom MFD screens on the horizon in the foreseeable future! Run everything including map switching from a custom GUI all controlled via the touch screen! How neat would that be....

And agree fully on using the factory ECU over aftermarket. Why stuff around with all the factory settings that do not need to be changed once you can do everything that you need with the OEM ECU.

Martin Donnon Mentor

Martin Donnon

Posted
  • Author
Posted

I am pushing for that custom GUI but apparently its fairly difficult.......time will tell

9 independent maps at the flick of a switch (Cruise Control buttons) is pretty spectacular for the time being! :)

Real Time tuning is just around the corner as well, being tested currently, all using the on-board RAM in the factory GTR PCM

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX · Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...