Jump to content
SAU Community

Recommended Posts

looking good mate!

they're actually grenade GX01 rims, not R34 GTR as stated on the last page :D

ah, useful bit of info that one, thanks for that, (i did say replica though :))

The car looks great !! I love what u did with the interior , how hard is the interior to do ? I wouldn't mind trying tha my self ??

Thanks dude, Sadly i have since removed it all since it started to peel up when the interior got hot (im 90% sure its because of the paint on the trim i applied it to) I am now contemplating 1 of 3 options.

1. Coating the trim in Clear a few times and then hitting it with the cf vinyl again in the hopes that the clear will provide a better base to adhere to

2. Stripping it back and re-spraying it in VHT Black Crinkle paint

3. Saving up and replacing the interior piece by piece with real Carbon pieces from Superior Auto Creative

  • 3 weeks later...
  • Replies 161
  • Created
  • Last Reply

Top Posters In This Topic

Again, it looks really good, Stephen. Great work. :thumbsup:

Thanks Victor,

Been set back a touch with doing the retrim on the doors, need to figure out a good way to remove all of the old foam that was under the material, that stuff is stuck on so damn well, metho cleans, but doesnt remove the foam as such.

I'v decided to do this to a side project. how do you join 2 peices properly?

some area's have taken a long time and many re-tries such as mirrors.

I'v stopped caring about little creases and once completely covered will redo them maybe.

my thumbs hurt..

what do you guys charge per hour to do it professionally, I'm not in brisbane though just curious.

Ok guys, bit of an update here,

Finally solved my problem with the foam on the door skins, the best solution was to take the skin off the door, and lay it flat, then with a scuffing pad scrub the crap out of it until the foam eventually all came off (forgot to get pics of it at that stage)

after that, a blade around the edge took off any of the excess bits in the recess.

Also, before i attacked the foam i figure, whilst the door skin is off i might as well wrap the window controls and also the triangles in the corners of the door where most people mount a tweeter.

TRIANGLE

166148_1701772540355_1119203328_1958808_4133662_n.jpg

166148_1701772580356_1119203328_1958809_1923464_n.jpg

PASSENGER WINDOW CONTROLS

166148_1701772620357_1119203328_1958810_2174921_n.jpg

166148_1701772700359_1119203328_1958811_6138713_n.jpg

165629_1701791820837_1119203328_1958874_797380_n.jpg

165629_1701791860838_1119203328_1958875_5354427_n.jpg

165629_1701791740835_1119203328_1958872_3105588_n.jpg

165629_1701791780836_1119203328_1958873_1482880_n.jpg

This is what the drivers door looks like at the moment, with all of the excess foam all over it, Horrible! (will attack this door tonight)

156948_1701804741160_1119203328_1958923_7893230_n.jpg

Then, these (and a scuffing pad that i forgot to include in the pic)

165629_1701791940840_1119203328_1958876_1614292_n.jpg

Added together =

164149_1701804781161_1119203328_1958924_1392835_n.jpg

And all back together retrimmed skin with carbon-ized window trims and triangles

156948_1701804821162_1119203328_1958925_4983739_n.jpg

Stay Tuned!

So putting a little attention towards the interior, :)

post-40562-1284969780_thumb.jpg post-40562-1284969888_thumb.jpg

Also worth noting, the bootlid has been re-glassed, as long as it doesnt crack or have any issues in the next few days, itll be getting primed and paint hopefully during the week, and then wrapped maybe around sunday *fingers crossed*

ive got the carbon fiber dash aswell

i just dont have the ac controls and the vents carbon fiber were can i get that

ive got the carbon fiber dash aswell

i just dont have the ac controls and the vents carbon fiber were can i get that

http://translate.google.com.au/translate?hl=en&sl=ja&u=http://www.superior-cia.com/&ei=tzchTYbGAsrCccjD_bQK&sa=X&oi=translate&ct=result&resnum=1&ved=0CCcQ7gEwAA&prev=/search%3Fq%3Dsuperior%2Bcia%26hl%3Den%26safe%3Doff%26biw%3D1680%26bih%3D860%26prmd%3Divns

These guys do most interior parts in carbon for R34's, a little experimenting will get you to the right section for the parts.

That said, those pics you quoted are what i wrapped in carbon look vinyl, so they aren't real carbon.

Little side project while i haven't been working on the 34

167194_1720121359064_1119203328_2011285_347935_n.jpg

167194_1720121399065_1119203328_2011286_1727446_n.jpg

167194_1720121479067_1119203328_2011288_6511999_n.jpg

http://translate.goo...0%26prmd%3Divns

These guys do most interior parts in carbon for R34's, a little experimenting will get you to the right section for the parts.

That said, those pics you quoted are what i wrapped in carbon look vinyl, so they aren't real carbon.

Little side project while i haven't been working on the 34

ohk so u done the top part with a carbon look a like sticker ?

this is mine ..

167705_10150112424961948_653866947_7453796_5181187_n.jpg

ohk so u done the top part with a carbon look a like sticker ?

this is mine ..

167705_10150112424961948_653866947_7453796_5181187_n.jpg

ah nice, yeah i did the whole lot with carbon vinyl, except the triple gauge cluster.

where did you get your carbon bits from?

ah nice, yeah i did the whole lot with carbon vinyl, except the triple gauge cluster.

where did you get your carbon bits from?

thanks..

i got the car like this

yea i think the gauge cluster would look abit odd carbon wouldnt match the dash

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...