Jump to content
SAU Community

Recommended Posts

Another fellow owner doing you guys proud!!!

187km/h in built-up zone

"A HOON'S joyride ended abruptly after police nabbed the Portland man driving at 187km/h in a built-up zone, more than 107km/h above the limit.Police caught the man, 25, on the Henty Highway between New Street and Cashmore Road in Portland's north just before 10.30pm on Saturday.

His Nissan Skyline coupe has been impounded until tomorrow and he faces charges including excessive and dangerous speed."

Article here

Link to comment
https://www.sau.com.au/forums/topic/331263-187kmh-in-built-up-zone/
Share on other sites

read this a few days ago..

what a dickhead - with a blatent dis-regard for the speed limit like this - id be happy to see people lose their licences for good.

all the people on the 'skylines are for hoons' bandwagon need to remember 'it's not the cars fault but the driver.'

also - welcome to SAU

though im guessing not a skyline enthusiast..

lol fact is she was in a cab..

you were in a gtr.

people who feel the need to yell things out to make themselfs feel better have already lost.

ive had bogans call stuff out before - obviously the smashing @ bathurst in the early 90's still haunts them!

ironic that so many are so proud to be australian yet they go and throw chevy badges on their holdens hey?

lol fact is she was in a cab..

you were in a gtr.

people who feel the need to yell things out to make themselfs feel better have already lost.

ive had bogans call stuff out before - obviously the smashing @ bathurst in the early 90's still haunts them!

ironic that so many are so proud to be australian yet they go and throw chevy badges on their holdens hey?

lol, yeah, but the chick was hawt though.

the gtr's a legend, but sadly i know nothing about the history of that car, not much anyway. All i know is, that its awesome.

lol, yeah, but the chick was hawt though.

the gtr's a legend, but sadly i know nothing about the history of that car, not much anyway. All i know is, that its awesome.

^ All you need to know :domokun:

Another fellow owner doing you guys proud!!!

187km/h in built-up zone

"A HOON'S joyride ended abruptly after police nabbed the Portland man driving at 187km/h in a built-up zone, more than 107km/h above the limit.Police caught the man, 25, on the Henty Highway between New Street and Cashmore Road in Portland's north just before 10.30pm on Saturday.

His Nissan Skyline coupe has been impounded until tomorrow and he faces charges including excessive and dangerous speed."

Article here

cop.. :)

read this a few days ago..

what a dickhead - with a blatent dis-regard for the speed limit like this - id be happy to see people lose their licences for good.

all the people on the 'skylines are for hoons' bandwagon need to remember 'it's not the cars fault but the driver.'

also - welcome to SAU

though im guessing not a skyline enthusiast..

Entirely correct. It is the hoons that choose the car they drive. Not that i can say anything, was going 110km/h today in 100km/h zone. But then again, the more power a car has, the more you want to squeeze it.

Edited by TyresBro

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...