Jump to content
SAU Community

Recommended Posts

Hi all, havnt been on here in a while since i sold my 32 bit before christmas, i miss it dearly now lol

Just want some clarification on SA police not being able to defect a car that is registered in another state?

Basically a friend and i have been told by numerous people that if you buy a car from a nother sate, e.g NSW, and you keep the registration in that state you cant be defected by SA police if you bring it down here...something to do with SA police being out of their juristiction as the car is under NSW law??

The reason i'm asking this is because "i know someone" who wants to get back into an import but really don't want the hassle from police and being defected and figured may as well do this as "their" family have property in NSW so "they" could register it there and bring it down here :/:)

Any help/advice is appreciated

Cheers

Vinnie

if the car is not deemed roadworthy, it can be defected within SA regardless of the state it is rego'd in.... same goes for cars with SA plates in other states.

that being said, the 5-0 probably would be a bit more forgiving seeing a NSW rego'd car doing hook turns in SA :/

why doesnt he just find a stock R32 or R33 and keep it that way?

cops will find it harder to defect a stock car.

But then we will lose our "hoon' image. And we wouldn't want that now..would we.

I heard that if an SA car gets a defect in Vic, basically, as soon as you pass back into SA, just rip the sticker off..however, it is still defected in Vic if you go there. I got told that before heading over to vic with some friends last year.

As someone who drove their R34 for about 9 months on NSW rego cos I was too slack to get it transferred over, I can assure you I got pulled over about on about a monthly basis for a 'license check' and at RBT checks where they close off the road, I'd have to give reasons why I was driving a NSW rego car around...

Since transferring to SA rego, I have only been pulled over once in nearly 3 years since (though I did get defected ...)

ahh k so it is possible to get defected then i guess..maybe just not as likely?? Unless you have straight pipes, 20" rims and a trubo sticking out of you bonnet lol

Also not looking at getting into another skyline, although i'd love to the po-po have ruined it for me really by targetting them so much.. so thinking of getting into an evo 7..seeing as they sorta just look like a lancer lol :woot:

Thanks for your responses and many more are welcome too :)

  • 1 month later...
I heard that if an SA car gets a defect in Vic, basically, as soon as you pass back into SA, just rip the sticker off..however, it is still defected in Vic if you go there. I got told that before heading over to vic with some friends last year.

my SA registered car got defected in Vic when i was on my way through to NSW a few years back.

I asked why an SA car could be defected in Victoria (mistake #1) when i was relocating to NSW to live. I was told by the police that they certainly could defect me and that the defect could get cleared in Victoria, NSW or SA regardless.

I rang Transport SA when i got to Sydney and was told that the defect was valid and on the SA computer system. I later cleared the defect when i returned the car to SA and all the defects were on the system at Regency (and then some, but that's another story best told with beer).

the bottom line is that if you get a defect notice interstate, the information will be transmitted back to SA so it will be valid - that's the benefit of a computerised system, i suppose. so if you have a NSW registered car here that receives an SA defect notice, then i presume that you would have to get that defect somehow cleared here or back in NSW - however, i don't know the answer to that one.

Its possible, but cops dont like the paperwork that goes with it so they usually dont stop interstate drivers.

i think that it was worse having an SA car in Victoria - it wasn't a pleasant experience...

if you do this,

you will have to prove that the alternate address is infact your place of residence

otherwise you are to transfer your details to the place of residence in (i think) 3 months.

if shit does hit the fan you can be put through the ringer as you failed to update your rego details and failed to transfer your license details, your records like electricity bills, rates, expiation notices, and voting details can be used against you.

or if you have a prang and the resident at that address claims it is their car, then you must be on the insurance details as a nominated driver or your insurance company might not cover you

why? just so you can have a bov...

its a big house of cards you are building to avoid defect, it only takes one card to see it all collapse.

better to avoid reasons for defect in the first place which i am sure you understand already.

i never transferred my license or rego details for 2 years in qld on an sa license ^^^ hence why i know about the above - i used the excuse that "i have only just moved here" but i'm lucky i was only pulled over twice by different cops b4 moving back.

Edited by 910trx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Remove it. Certainly from the hub face. I'm not in love with leaving it on the wheel assembly surface either - but if it is common to do so, then....maybe fair enough. It's not difficult. Just time consuming. For the hub face you just need a large enough block and suitable grades of abrasive paper to get it off flat. The same would be true of the assembly face. Just more time consuming, probably needing a lot more care. It's defo going to be easier just to assemble the wheels as is, seal them up, and check them periodically to see if there's any movement or loosening of the fasteners, than it will be to remove it though.
    • Hello, I got my wheels powder coated and they've powder coated bloody everything the mating surface and hub (even told them not to lol) anyway should I leave it or remove it. (Would be very hard) I've searched a lot and lots of powder coaters don't mask the mating surface but do mask the hub surface. How bad it powder coat on the mating surface or hub? My question is what should I do?
    • Yeah, R34 with RB25DE likely has a 4AX01 box in it, which is a medium duty auto ~ with the RB25DET mill, it would've been fitted with 4AX00 (4AX13) heavy duty build (same case, different internals). An RB25DET will lunch on a medium duty 4R01 auto in pretty short order ...to give you some visual idea of differences between the 'medium' and 'heavy duty' boxes, you only have to look at the 2/4 band for comparison...it's chalk and cheese...(plus bigger high clutch, extra pinion in the planetary sets, higher oil pump output, different bearings, higher TC stall speed )... You can control them with just about any aftermarket TCU for electric-over 4-speed with TC lockup clutch (ie; the GM 4L60E and others)...I have a custom standalone TCU that includes MAP sensor (for turbo applications) along with TPS, RPM, and line pressure monitoring...in other words, I don't use any ECU signals...no real need to.
    • If you want to do the wiring, the GTT engine ecu has the same pinouts extra that the seperate TCM in the NA car has. You can literally grab the wires/pins that lead into the Seperate TCM and wire them into the corresponding pins in the GTT Engine ECU. You could then in theory Nistune it. I realised this when everyone put it in the too hard basket and I actually looked at the f**kin R34 manual. This is after I had previously had a seperate aftermarket TCM controller in my original N/A chassis car and a very built gearbox from a GTT, running a seperate Haltech engine ECU. I ran into this issue when I re-shelled the car into a GTT shell, so my aftermarket TCM was no longer plug and play, because the loom/modules were not present. I was pretty livid when realizing just how simple the original fix actually was. It sat for 3+ years at various workshops trying to find a solution. In practice none of this is a worthwhile idea for a lot of reasons, generally surrounding the shitness of the NA auto, the autos in general that come with skylines, and the NA engine and lack of gains. The gearbox is specced for the 2.5L N/A and barely at that level. If you have to pay anyone any money to do any of this, that is money spent on manualizing the car and it's not even close in terms of a comparison. Learning to drive manual is simpler than going through the pain of dealing with the N/A gearbox and he'll have fun to boot.
  • Create New...