Jump to content
SAU Community

V36 Tv

ChrisB
 Share

Recommended Posts

andy65b Veteran

andy65b

Posted
Posted
Anyone know where the AUX input is on the V36. There is a button but no sockets that I can find that are accessible anyway. Just wondered if there was such a thing as a DVB tuner that can run through the AUX.

Thanks

Hi Chris

There are Asuka Hawk Ranger DVB tuners available through me or CHOOK on this forum.

I have not seen inside the V36 but I would presume that the set up is similar to the V35 in that the AUX input is through the OEM tuner. The plug is not what you would normally look for but there is an adapter cable available that changes the input to RCA plugs to work with external tuners or other devices.

In the V35 the tuner is in the boot on the left side under the floor tray.

I am not sure where you are but if you are in Sydney I am happy to give you a hand to find it and see what it need to plug into the AUX input.

Cheers

Andy

Link to comment
https://www.sau.com.au/forums/topic/331923-v36-tv/#findComment-5385878
Share on other sites
ChrisB Rising Star

ChrisB

Posted
  • Author
Posted
Hi Chris

There are Asuka Hawk Ranger DVB tuners available through me or CHOOK on this forum.

I have not seen inside the V36 but I would presume that the set up is similar to the V35 in that the AUX input is through the OEM tuner. The plug is not what you would normally look for but there is an adapter cable available that changes the input to RCA plugs to work with external tuners or other devices.

In the V35 the tuner is in the boot on the left side under the floor tray.

I am not sure where you are but if you are in Sydney I am happy to give you a hand to find it and see what it need to plug into the AUX input.

Cheers

Andy

Andy, Thanks for the offer, very kind of you. I'm in Melbourne so I'll have to pass. Chris suggests the tuner is in the arm rest, I'll go and have a look.

Cheers

Chris

Link to comment
https://www.sau.com.au/forums/topic/331923-v36-tv/#findComment-5386092
Share on other sites
ChrisB Rising Star

ChrisB

Posted
  • Author
Posted
its in the arm rest on those. there are a few ways to hack video into those cars - none of which are cheap.

Chris,

In the arm rest is a 12 V socket and a multi pin connector. Do you know what type of connector this is and perhaps which pins are for AV?

Thanks

Chris

Link to comment
https://www.sau.com.au/forums/topic/331923-v36-tv/#findComment-5386154
Share on other sites
ChrisB Rising Star

ChrisB

Posted
  • Author
Posted
i take it you mean aux input for ipod or a seperate tv tuner?? im probably on the wrong track here but my aux input is in thecentre glove box under the small lift out shelf along with extra power sockets hope this helps

Yes the socket is in the arm rest or center glove box under the removable shelf. But what type of connector is required to get AV into this AUX?

Link to comment
https://www.sau.com.au/forums/topic/331923-v36-tv/#findComment-5388608
Share on other sites
ChrisB Rising Star

ChrisB

Posted
  • Author
Posted
Can we have some photos

One of the pictures shows the V36 Skyline AUX connector and the other is the American G37 AV input both found in the center arm rest. I assume there is a wiring harness to convert the mult pin socket to simple RCA video and audio. Anyone know where to get one?

Thanks

post-72666-1281344021_thumb.jpg

post-72666-1281344139_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/331923-v36-tv/#findComment-5389796
Share on other sites
mystic Explorer

mystic

Posted
Posted
One of the pictures shows the V36 Skyline AUX connector and the other is the American G37 AV input both found in the center arm rest. I assume there is a wiring harness to convert the mult pin socket to simple RCA video and audio. Anyone know where to get one?

Thanks

post-72666-1281344021_thumb.jpg

post-72666-1281344139_thumb.jpg

Weird mine came with the AV inputs, I thought the multi pin was for phone

post-75814-1281348254_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/331923-v36-tv/#findComment-5389925
Share on other sites
ChrisB Rising Star

ChrisB

Posted
  • Author
Posted
2007 370GT Manual SP.

Nice, Mine is the 5 speed auto type S. As yours is Manual that explains the diffenent center arm rest. You also have a hand brake there I guess and mine has a foot opperated hand brake. I wonder if those RCA plugs are specific to the P package.

Would have loved a manual but they are pretty rare and a few dollars more than the auto.

Enjoy

Link to comment
https://www.sau.com.au/forums/topic/331923-v36-tv/#findComment-5390115
Share on other sites
  • 1 year later...
  • 1 year later...
Alkatraz Rising Star

Alkatraz

Posted
Posted

Short answer no. Long answer no you cannot, the funny fat plug with lots of connections if for some sort of car phone. The USDM models have an ipod plug instead of the phone plug, so we lucked out. Just use one of the many other options, Bluetooth stream music from your phone, fill the music box up with music (takes a while but quality is great), plug something into the RCA connectors or use the minidisk slot. So many options........Ipod is like sooooo 2005.

Link to comment
https://www.sau.com.au/forums/topic/331923-v36-tv/#findComment-6638397
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...