Jump to content
SAU Community

Recommended Posts

As some of you may have read in previous threads I have been having trouble finding some body to tune my PFC Pro, as they are a little different to the non pros.

I was having trouble getting the computer to allow more than 5 psi of boost :-{

Anyway to cut a long story short, the problem has been fixed and the computer is now tuned. I must thank Dr_Drift of BMT Motor sports melbourne for all of his patience, he managed to fix the bazar issue & get 200 rwkw out of it as well.

Here is a list of my mods:

Pod with cold air box

3' exhaust with high flow cat

cam gear set to 3 deg

pfc pro

FMIC

Excedy ceramic button clutch

running 12psi of boost using bleed

Supra TT fuel pump (flows better than a GTR pump)

there might be more that I cant think of at the moment.

As far as the price is concerned you guys will have to ask Dr_Drift about it as I had some problems fixed and stuff like that.

thats very impressive figures for the BMT dyno, which generally most fully maxed (sans turbo change) 33 GTS-T push around 150-170rwkw

As Gunmetal said.

BMT aint got thier dyno into the ground yet.

So he's using... oh, i forget his name.

The guy from AutoSalon/Auto Expo, anyway, there are using his dyno for a few months etc etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...