Jump to content
SAU Community

Recommended Posts

That's what i like to hear! the bit about it feeling special I mean.

This is a learning curve for me, I dont even own a toolbox, or have my own garage. so that might give you an idea of how often I work on cars.

Pardon me for being ignorant, but if a turbo fails, does it destroy the whole engine with it? whats the worse case scenario regarding turbo failure?

Mine had stock turbos when I bought it, and ran upto 20psi for a year (very sure they were not stock..) the front one blew, so pulled them out and stuck some N1s in there, also know of an R32 that has done Targa Tas about 9-10 times now running ceramic turbos, and has not had 1 turbo failure. My suggestion would be if you like working on cars, and are happy to have it off the road a bit, (and spend some money) then push the limit a bit, try to do the work first though (be it Turbos, or even an R33 motor etc). If you are not wanting to do this sort of work, do not run over 10-12psi, and keep plenty of oil in it (1/2-3/4 litre over full) and you will have a reliable (if thirsty) and very fun road car. After 1 year my car still feels special every time I drive it, and I love it.
  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

I have 2 of the same car. I love both. I drive my wife's car over the weekend and then the GTR on Monday and it is heaven. Worst case you will lose an engine. $10k bill for a proper fix.

Turbo's shouldnt fail at 14psi or under.

I can't see a reason they would unless its been thrashed to hell, which I doubt would be the case.... (with this car anyway)

If its stock, check for the boost restrictor. My 33 still had it in there, 14 years down the track. Taking it out = 14psi. (Was in place to help make it "276hp")

Edited by Ten Four

I've gotta say, I couldn't have found a more helpful forum, really appreciate the feedback and answers to my many questions from you all!

There's still a chance I may pull the pin on the whole idea and wait a bit longer, but it's been an interesting few days learning the ins and outs

of buying a GTR.

Thanks guys.

You might be right about that. As far as I can tell

though, the only difference is Brembo breaks, BBS wheels, a sticker on the

back, and an updated 4x4 system? I think they're also a tad heavier?

Haha, I'd go that VspecII if the Vin and car checks out.

Value will only go up :)

Yeah, Brembo's, BBS, sticker, different diff, R33 GTR 4wd system (its much quicker to shift torque to front wheels).

Some said steel compressor wheels in the turbos? I'm not sure on this though.

Plus, only about 1300 VspecIIs ever made.

Ok guys,

I've decided to not go ahead with either of these cars for now. Thank you all for your input, I probably would have made a huge mistake

if not for this forum.

The dream is not over! but I need more time to look and research, its foolish of me to think I can find an original car that wont need money spent

on it, so I hear what you're all saying about the pros of buying an already modified car, its just a matter of finding one that's been modified in all the

right areas with an emphasis on durability and reliability - for me anyway.

Cheers,

Paul.

V-Spec II = Base model R32 GTR, but with:

Brembo Calipers.

Revised ATTESA E-TS system.

17" BBS wheels with 245/45/17 tires.

Weight about 50kgs more.

Standard Ceramic Turbo's as only the R32 GTR N1's came with N1 Turbo's = Steel Wheels.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And I just realised that that advice is slightly nonsensical for a GTR, because you need 2 of them. But it is otherwise true.
    • Having had a reasonable look at the car, I'll be able to remove the (one time) rams and retract the hinge (they are held in the down location by a tiny (m3?) sacrificial screw) which will get it physically back in shape. From there if you remove the rams you need a resistor to turn off the airbag light (as Mark said, there are plug in kits and I might go that way because its reversible). And...per all the threads on here, even if you have the resistors to turn off the airbag light, the bonnet light will stay on as it writes to the airbag computer history - that is either replace the airbag controller, reprogam the EPROM (if I can work out how), or remove the globe from the dash. Having seen how sensitive this system is, if I had my time over I'd pre-emptively remove the rams, even on a road car, because this is all a very unnecessary pain in the arse. Reminds me, time to go and have a look at the Fuga too....
    • Hi, I need same this wing nismo , Does anyone have one for sale?  if any one have can contact me  00966546888343
    • Nah, lots of insurance repairs on V36 and V37 for pedestrians deployments. Reasons ranging from possums, to extremely severe potholes have deployed them. However, paying for the full repair can still be upto $5k AU some people have noted!
    • Hi, i got 1998 r34 4 door auto abs model and its manual converted with bigbox when i bought it . I successfully find the neutral and reverse light wire but can’t find the speed signal wires for speedo drive. I know its grey plug but on my loom no grey plug with 2 wires . I opened the loom upto where it getting branch with other wire, i’m amazed they is no wire. So need help how to fix the speedometer problem. I search on google it says some r34 model measure speed from diff sensor. Is it right? I talk to a wrecker he say no this isn’t right, i’m kinda stuck. Please help
×
×
  • Create New...