Jump to content
SAU Community

Recommended Posts

PM me with what your after.

IGNITION COILS

MAIN LOOM

ENGINE BAY LOOM

BONNET RELEASE CABLE

STEERING COLUMN WITH IGNITION SWITCH AND HKB BOSS KIT

THERMOSTAT CAST

WATER INLET CAST

BRAKE / CLUTCH / ACCEL. PEDALS

DOOR LOCK TIMER

CLUTCH FAN

HEAT SHIELDS

FUEL TANK

HEATER LINE

SPEEDO CABLE

SIDE SKIRTS

"SKYLINE" DOOR TRIM

"TWIN TURBO" PIPE

COILOVERS

RADIATOR COOLANT RES.

WINDSCREEN WASHER RES.

POWER STEERING RES.

CHARCOAL CANISTER

SEATBELTS

SIDE REPEATERS AMBER/ORANGE

FUSE PANEL VENT

FACTORY BOOST SOLENOID

THROTTLE POSITION SENSOR

ASH TRAY

CAMS

INLET SANDWICH PLATE

ALPINE TYPE S 6.5" COMPONANT SPEAKERS

ENGINE MOUNTS

HEATER / AIRCON CONTOL (UNDERDASH)

AIRCON ELECTRONIC CONTROLLER (DASH)

ABS MODULE

AIRCON TEMP SENSOR

ENGINE WIRING LOOM

ALTERNATOR BRACKET

FUEL FILLER COVER

STARTER MOTOR

POWER STEERING PUMP BRACKET

AIR CON PUMP

Link to comment
https://www.sau.com.au/forums/topic/332585-whats-left-from-my-32gtr-wreck/
Share on other sites

hey buddy, any chance u have the surround for the CD player the black bit, also gose down and around the gear shifter... i can post a pic if u need it.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...