Jump to content
SAU Community

Recommended Posts

Hi guys,

Just a quick question I'm sure:

Basically I've owned my R33 GTR for about 2 months now, I put some apexi pods filters on it and just has a cat back exhaust at the moment otherwise completely stock.

Now my boost gauge use to say -11 ish on idle and boost up to abou 10 PSI, (on both my mechanical boost gauge and stock gauge), and now after a oil change (duno if it could be related at all) sits at about -2 ish on the gauges and only found that its boosting up to about 6-7 PSI? and car just seems a little slower in general..

Now I'm no engine guru but my first thought was maybe there is a leak somewhere in my FMIC piping? but figure I'd just ask here to see if this has happened to anyone else.. sorry if its been answered before but couldn't find anything.

Thanks in advanced,

Leigh

Link to comment
https://www.sau.com.au/forums/topic/335130-rb26-noob-question-regarding-boost/
Share on other sites

yep, most likely a pipe blown off, or vacuum hose off. best bit if you are not sure what to look for is take it to a mechanic and get them to find the missing/split/blown pipe. easy fix.

Ah ok no worries, it must be only small / hard to find if its still getting some boost I guess? I was going to get some parts and a tune by Status so I assume Trent should be able to find it if I cant haha

edit: is there any common places to look?

Ah ok no worries, it must be only small / hard to find if its still getting some boost I guess? I was going to get some parts and a tune by Status so I assume Trent should be able to find it if I cant haha

edit: is there any common places to look?

Does your car have a front mount?

If so, the turbo > first hot pipe, is a common one on aftermarket kits. So is throttle body and first of the cold pipes.

Are you blowing any black smoke and is it idling rough?

Its just got the stock front mount

I will check pipes when I have a chance

It doesn't seem like its blowing to much black smoke if any, the rear of my car gets a little black but seems fairly normal black-ness to be honest.

It seems to idle a little rough sometimes but not at all times, and also seems after I turn the car off for say 5 minutes (get petrol or what ever) get back in and drive off it has trouble when it hits boost seems to missfire a bit? or at least seems like that and also will idle rough at this stage as well.

Used a oil filter removal chain, and then replaced filter with a socket type filter 'Drift' brand.

The only thing I saw near the filter was something going to the front diff? a wire or something from memory

under the inlet manifold there is a vineyard of black vacuum hoses. have a really good look, even use a mirror, its to coincidental that you changed the oil then this happened,

the reason i asked it you used a tool is this would make more sense if you pulled a hose off

yeah trent will be able to find it no problem in 10 mins or so. he would have fixed literally hundreds of skylines with the exact problem you describe.

Yeah i'll try and have a look when i can.. if not fixed I'm sure Trent will have no problems he would be 100x better with this sort of thing then myself :down: I'm more of a I.T guru rather then engine troubleshooting..

And yes! GTR has FMIC! ;)

Happy that its nothing serious

The map sensor for your gauge is located on the drivers side of the engine bay near your brake booster. There is a hose that goes from that to the back of the plenum near the firewall. The rubber tends to go hard, split/crack or just break off the brass pipe fitting that is on the back of the plenum.

You can easily reach it to check the hose. Give the hose a wiggle and squeese where it attached to the plenum. If its hard and cracked it will probably break off completely. Replacing the hose and doing a complete pressure test to identify other failing hoses is your best bet.

Well I feel like a idiot for not seeing this while changing the oil but here was the problem (simple boost gauge T-Piece rubber tube has busted):

Thanks for the help and advice people :ermm: gauge went from -2 ish to -20, and boosted 10psi plus now instead of dropping at like 6-7 psi and just not running well in general.

img0212q.jpg

:D

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...