Jump to content
SAU Community

Failure To Display P Plates -r34 Factory Tint

m1v

By m1v,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

m1v Newbie

m1v

Posted
Posted

hey guys, just got pulled over, i drive a r34 na 4door, and am losing 3 points/fined $119 because my tint is too dark to see the p plate on the back window even tho its factory tint + vicroads admitted they f**ked up when they designed the new green p plates.

has any one else copped this or know anything about it? ill most likely be losing my license over this since i dont have enough points to take the 3

should i bother arguing over this, or are they going to tell me my tint is too dark.

jrm Veteran

jrm

Posted
Posted

It's your responsbility to ensure your plate is visible. If your tint is that dark, or you have a spoiler in the way obscuring visibility or whatever - you'd be aware of that - and it's your responsibility to place the plate in a more appropriate location that is visible by other motorists.

I had a friend who got hit with the same fine because his P-plate fell down (and you could clearly see where it used to sit from the mark on the glass - and how it had fallen). So yeah.

I'd probably take it to court, especially if you're going to loose your license over it. But it might be best to consult some legal advice and see what likelihood you have of getting out of it.

JGTC Proficient

JGTC

Posted
Posted

sorry to hear man!

in NSW it is illegal to even display the plates on the inside regardless of visibility, mate of mine got done the same deal as you even though his were clearly visible. magnets of brackets for this side of the seaboard unfortunately.

if your license is at stake i would suggest writing a letter pleading leniency regardless of the outcome, perhaps get some references and a JP to sign it or something

all the best with it,

danny

Birds Grand Master

Birds

Posted
Posted

They are absolute c***s with the P plate rules...so stupidly strict and I'm not a P plater. I really do feel sorry for some kids...one of our delivery drivers at work lost their job here because the P plates we gave him to put on our delivery car didn't stay up (it had fallen on the parcel shelf) and he wasn't to know that, it's hard and dangerous to crane your head around in a ute to see if your P plates are still up...

When I was on my Ps and driving my mum's VR Commy with tinted windows (not very dark at all), I was told by a cop at a breatho station that I should put my P plates on the outside of a tinted car because he could have fined me for it.

Why it gets treated with much the same punishment as running a red light camera I'll never understand...

samuri Rising Star

samuri

Posted
Posted
sorry to hear man!

in NSW it is illegal to even display the plates on the inside regardless of visibility, mate of mine got done the same deal as you even though his were clearly visible. magnets of brackets for this side of the seaboard unfortunately.

if your license is at stake i would suggest writing a letter pleading leniency regardless of the outcome, perhaps get some references and a JP to sign it or something

all the best with it,

danny

if you have already lost point I don't like your chances even so the above post is excellent advise.

if your job depends on it see a lawyer. You are depending on the expertise of a govt dept which would seem to reduce your responsibility in the eyes of a reasonable person. i bet there is no case law on your particular incident.

It shits me when the bureaucracy doesn't take responsibility for its actions. Your case is not so black and white

m1v Newbie

m1v

Posted
  • Author
Posted

thanks for the replys guys, i think im just going to cop it and see if they offer me with the 1 point deal for 12 months and lose your license for double if you lose that point or whatever it is.

whats funny tho is i was pulled over two weeks ago by a cop thats known to be the biggest P plate buster, he straight away asked me to open my bonnet, he then searched my engine bay for a turbo & other illegal mods, so i was happy to show him, he sees a standard rb25de, i told him i get off my p's soon so im getting a turbo then, he laughed and said well your one of the few that are actually doing the right thing! he seemed happy and let me off for having bald tires, he said get those back tyres changed and goodbye.

after all the other shit i could have lost my license over im goin to lose it over failure to display p plates. awesome.

i would have been happier to lose it if i was doing something stupid.

/end rant

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
×
×
  • Create New...