Jump to content
SAU Community

Recommended Posts

hey guys im just looking at buying a r33 na 96 model, not the gts4 either, just curious are there any weak points in the car i should be looking at as the importer is letting me put it on a hoist to inspect, also any body know if top secret imports blacktown is a good importer. Another question how would the stock do against some hondas e.g. integra vti-r and what are the best mods to do to the car without major changes e.g. engine .

thanks,

Link to comment
https://www.sau.com.au/forums/topic/335627-buying-r33-non-turbo-advice/
Share on other sites

ive got an N/A gts4, more then happy with it for being on my p's. Dont really know what they would go like up against a hondas ect, but i couldn't really care either, For me its a nice ride that has enough power and handling to let me enjoy it.

I haven't bothered spending money on mine power wise, Bought some good tryes and got a good alarm installed + insurance ect. I dont really see it being worth it doing any engine upgrades now.

Change your oil and filters regularly and don't thrash it with out maintaining it.

I have a 96 R33 manual with the Rb25 and it's ok. It rides nicely and has just enough power but don't expect it to be fast. You will lose to most Vtech honda's such as b16a civic and integra not to mention type-R. Minor power gains can be made from a good air filter (expensive panel filter) or boxed pod, with extractors + exhaust. My advice would be to wrap some good tyres on it and keep it maintained until you are off your restricted plate and can afford something faster if that's what you want.

The Rb25 has been the slowest car i have owned but then again i'm no 'P' plater (we can drive whatever we want in NZ, even on our restricted license - which is your P plate).

One thing to look for when viewing your R33, listen for gearbox/clutch/bearing noises at idle when you engage/disengage the clutch. If you can hear audible noises such as rattling or scraping something could be on it's way out. Obviously look for any oil/water leaks from underneath and make sure the bodywork is all straight under there (no damaged chassis)

  • 3 weeks later...
hey guys im just looking at buying a r33 na 96 model, not the gts4 either, just curious are there any weak points in the car i should be looking at as the importer is letting me put it on a hoist to inspect, also any body know if top secret imports blacktown is a good importer. Another question how would the stock do against some hondas e.g. integra vti-r and what are the best mods to do to the car without major changes e.g. engine .

thanks,

Definetly check for cracks in bushes and joints. Owned a r33 for a year and half, only realy complaint ive got about them is the stock exhaust whcih makes a really annoying raspy rattling noise at around 3000rpm.

hey guys im just looking at buying a r33 na 96 model, not the gts4 either, just curious are there any weak points in the car i should be looking at as the importer is letting me put it on a hoist to inspect, also any body know if top secret imports blacktown is a good importer. Another question how would the stock do against some hondas e.g. integra vti-r and what are the best mods to do to the car without major changes e.g. engine .

thanks,

will get beaten by a lot of hondas, commodores, falcons, etc. some it will be close, others won't

I have a 96 R33 manual with the Rb25 and it's ok. It rides nicely and has just enough power but don't expect it to be fast. You will lose to most Vtech honda's such as b16a civic and integra not to mention type-R. Minor power gains can be made from a good air filter (expensive panel filter) or boxed pod, with extractors + exhaust. My advice would be to wrap some good tyres on it and keep it maintained until you are off your restricted plate and can afford something faster if that's what you want.

The Rb25 has been the slowest car i have owned but then again i'm no 'P' plater (we can drive whatever we want in NZ, even on our restricted license - which is your P plate).

One thing to look for when viewing your R33, listen for gearbox/clutch/bearing noises at idle when you engage/disengage the clutch. If you can hear audible noises such as rattling or scraping something could be on it's way out. Obviously look for any oil/water leaks from underneath and make sure the bodywork is all straight under there (no damaged chassis)

often this is simply a bearing and isn't overly expensive to change, or really something major to put you off buying the car as often the bearing will still last for a long time. it can be a good way to get the price of the car dropped though.

lol another vs honda thing xD..........stock NA skyline is a nugget. Sorry to say ;) but if you whack on a full zorst, good intake and a light remap from perhaps a safc or something similar, it will start going sumwere lol been there and done that when my gts4 was n/a heheh. Did a 14.6 in wen it was na.

The US government never said Hussein was behind 9/11. Yes, they sure made it look like they meant that.....propaganda is nothing new in war....hell they used shit like this in WWII.

http://www.cheap-uggclassicboots.com

Edited by brightmix
hey guys im just looking at buying a r33 na 96 model, not the gts4 either, just curious are there any weak points in the car i should be looking at as the importer is letting me put it on a hoist to inspect, also any body know if top secret imports blacktown is a good importer. Another question how would the stock do against some hondas e.g. integra vti-r and what are the best mods to do to the car without major changes e.g. engine .

thanks,

don't do it!!

well, that said, get a supra if NA.

lol @ thread, poor n/a, I'll shed some light..n/a skylines won't be much quicker than those mentioned above around the streets. But find a long straight and you notice they stop moving afta bout 120km/h lmao......

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What type of track driving will you be doing?  Do you have a set of class rules you need to abide by that will limit your rim / tyre width?
    • I've been reading a lot lately about unsprung weight and how beneficial it can be to reduce it for driving on the track, given my semi's only have another day or two in them I am throwing around the idea of some lighter wheels and a square set up. I have 265/35/19's and 245/40(?)/19 Federal 595's at the moment. The wheels and tyres are super heavy. I looked up my wheel weight online and got 14.5kg naked. Not sure if this was 8.5 (front) or 9 (rear) but that's a lot. I have also been reading about the benefits of a square setup. Much better rotation and potentially less understeer.  When I throw these together I'm thinking about a 17x9 or 18x9 square (preferably under 10kgs per wheel) with 245 or 255's. I can get some cheap 17x8.5 BMW M Sport wheels, they weight 10.5 kg's each but at 8.5 wide could probably only get 245's on them? I know they come with 255's from factory but semi's are a bit chunkier. Otherwise it will be aftermarket wheels in a 9" width. Most of the other BMW wheels are heavy unless you pay a squillion dollars for some M wheels.  Although, the E46 M3 Style 67's could be good but I'd have to buy 2 sets to square them up.  My car has a tickle over 400hp and about to put an LSD in also, is 245 a little thin for a square setup? It kinda feels that way to me. Also, is there any tangible benefit to having 18's over 17's? Is the footprint demonstrably bigger? From those of you who went to light(er) wheels after heavy buggers, did you notice it much?
    • Start with the R32 GTR wiring diagram. The ECU is essentially the same, so the pinouts are good. The details around ECCS relays, etc might differ a little bit, but the reality is that you need to get ignition power to kick the ECU so it powers up the ECCS relay which brings the rest of the ECU up. This also gives power to the other circuits that are needed to make the engine run, like the ignition coils, etc. All of this is visible on the R32 diagram and should give you a strong guide, even if it's not quite the same as the R33. As to specifics - I'm pretty sure no-one can help you from afar, as there is no way to know what mistake or omission has been made in connecting stuff up. It always turns out to be "LOL, I shorted something and an entire wire vanished out of the loom", or "We never connected X or Y main connector", or "shit, you mean I need to have that fuse installed?".
    • hello wanted some insight on what my problem could be so i swapped a RB26DETT into my r33 gtst used a R33 GTR engine harness and im using a haltech platinum pro. The car cranks but no start the ecu isn’t getting any power now im trying to find out why i cant seem to find any schematics  or diagram for the engine harness for the r33 gtr anything helps thank you.
    • hahahaa @GTSBoy that is my last resort. Like use a cardboard and cut it using the indicator as a reference. But I was winging my luck to see anyone had a spare bumper because drawing the outline off the hole is always easier and less chance of mucking it up
×
×
  • Create New...