Jump to content
SAU Community

Recommended Posts

650cc SARD 1/2JZ-GTE SARD Yellow Ellipse 2 or 4 13 1.5ms 650 1001-87091 / 63564 SARD

so i have these injectors had them tested the other day and all were good bar one needed a bath...

But when i picked them up i was informed there were 450cc, what the?

Well turns out there was a setting wrong on the machine and once corrected a figure of 550cc was reached...Still not right... :D

now problem is i need to load injector setting into ecu so i can drive the car to tuner but what do i go by the spec sheet or the test??

I was also told they would probably not handle e85 :)

Link to comment
https://www.sau.com.au/forums/topic/336447-injector-q/
Share on other sites

650cc SARD 1/2JZ-GTE SARD Yellow Ellipse 2 or 4 13 1.5ms 650 1001-87091 / 63564 SARD

so i have these injectors had them tested the other day and all were good bar one needed a bath...

But when i picked them up i was informed there were 450cc, what the?

Well turns out there was a setting wrong on the machine and once corrected a figure of 550cc was reached...Still not right... :D

now problem is i need to load injector setting into ecu so i can drive the car to tuner but what do i go by the spec sheet or the test??

I was also told they would probably not handle e85 :)

Im sure you wont have a problem with e85, remember most fuels have 10% these days anyway. Can you just set them at 550 and drive it nicely?

Link to comment
https://www.sau.com.au/forums/topic/336447-injector-q/#findComment-5441804
Share on other sites

That's strange. Sard 63564 are 800cc injectors.

Haha... it just gets worse

Nah mine only have this no..1001-87091 I found pictures of them on the net and various things saying they are 650 however there is a 550 sr20 injector that looks the same but has a different no...

bit of a mystery :D

Guess ill just put em in and see what happens...

Link to comment
https://www.sau.com.au/forums/topic/336447-injector-q/#findComment-5441966
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...