Jump to content
SAU Community

Recommended Posts

As posted in the title EOI unfinished project, 94 R32 GTR

$30,000ono, and YES it is not running, if your seriously interested this could be negotiable.

What you are looking at is a 94 model r32 GTR in need of a little TIME to get it back on the road, car is more a less complete. All interior, panels etc are here, only thing missing is a working gearbox, current box has a blown 3rd gear, an diff may need attention, was beginning to wind before car came of the road also no Air con, or ABS, it will come with all required parts but all lines were cut out.

Ok so will start with the car still VIC registered and complied, it is all assembled apart from the front guards, bonnet, front bar and everything else in the engine bay, as at present the engine bay is in hi fill, and was meant to be painted but I have just had enough and want it gone, but everything is there.

Car has and is assembled with:

Hi cas Lock bar

HKS hypermax coil overs

R32 GTR wheels with RE55 semi slicks

Pretty clean interior, apart from usual dash bubble

Bosch 040 intake pump

2 X 044 pumps

Advan surge tank all mounted and all functioning

Autronic SM4

Autronic CDI500R

ARC air Difusr

Trust Radiator

Boost controller/ turbo timer

Ok so now the engine needs to be assembled (so you will need to get ALL gaskets) but reads as the following:

Block is assembled with:

Custom Aries Pistons

Crower Rods

ARP Mains Studs

ARP Head Studs

ACL Race Bearings

Machined and prep block

R34 GTR Crank all balanced and machined

Trust Sump extention

Greddy oversized Pulley Kit

Ross Tuff bond Harmonic Balancer

Trust Oil Pump

N1 Water Pump

Head is assembled and flowed [email protected] with the following

Ferro 1mm oversized valves

Tomie type C Valve Springs

Tomie Pro Cam Exhaust

Tomie Pro Cam Inlet

Tomie adjustable cam pulley Inlet

Tomie adjustable cam pulley Exhaust

Single turbo set up

Custom Hks T51R SPL BB Turbo

Custom Hks Manifold to suit turbo

Hks 60mm Waste Gate

Hks V band Flanges

HKS anodized pink funnel

Garret carbon fibre looking turbo beanie

4 Inch Trust Intercooler

4 Inch stainless Exahust turbo back to cat

NO water oil lines, (simply i didnt like they way they were ran so you will need to have your own made)

Greddy Plenum

Mal passi Fuel Regulator

Setrab oil cooler with all lines

Blitz blow off valves

Not sure if it will come with a clutch cause Im not sure where it is at the moment, but will be able to sort something out sorry.

Ok im sure there may be a few more things but that is all I can think of for the moment, all machining and balancing is all done, and this set up has been on the road before, apart from the oversize valves, that I have just had done.

The car has featured in HPI issue 110 last year with the plates T51R.

I wont lie this is probably a project for someone who has a bit of mechanical knowledge and access to a tow truck/car trailer. Realistically if you could spend 8 hours a day for 3 weeks on this it would certainly be on the road and driving.

so here are some pics of the engine bay so you can see what your in for, if you want more photos of stuff or any questions please ask, but wasnt to sure what other photos to post.

ALSO PLEASE DO NOT TELL ME YOU CAN BY THIS CAR FOR 15000 ETC ETC, I DONT CARE IF YOU WANT TO SPEND THAT MUCH THEN BUY THAT ONE!

and also at present i am not separating anything, maybe early next year if there is no interest in the complete package.

cheers Lee

post-1964-1284370831_thumb.jpg

post-1964-1284370997_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/336666-eoi-unfinished-94-r32-gtr/
Share on other sites

pftttt dude, my mates cousins friends uncles mates pet hobos monkeys cousins dad can get these for like 10k..

joking :)

seen this car in HPI and around a few times, looks immaculate, new buyer will be very lucky!

Free bump, car looked awsome in the mag . Goodluck on the sale.

If you were eventually to sell the parts seperatly id be very interested in the turbo kit

got hundreds of pics if your seriously interested, and as for the article, not sure how that will help it sell. if ppl are genuinely interested i will be happy to answer any questions, here or via PM.

and its silver. engine bay is in high fill

here is a photo anyways (no longer comes with those wheels) R32 wheels

post-1964-1287051532_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...