Jump to content
SAU Community

Recommended Posts

Hi All,

i was searching the forum for such information but i can't find it .......

currently i have just completed my rebuild of my RB26 engine, spec are below

RaceTech 86.5 mm piston

TOMEI 1.5mm @ 87mm metal head gasket with oil restrictor

Jun Oil Pump

Balance crank, piston, rod, clutch, main pulley

Refresh Standard Head

HKS step 1 IN/EX 264 cam

Jun Cam gear

BC valve spring

Greddy type 6 throttle intake manifold

SARD 720cc injector

HKS type fuel rail

Tomei Fuel regulator

Garrett GT35R AR1.06 split type

aftermarket ex manifold split type

Tial 44mm ex wastegate

Power FC D Jetro

ETC ETC...

i was hoping to make 550whp - 600whp. i am not sure whether i be at that mark or not.

Would I?

The main question i wan to find out is that would a single SARD / HKS 280lph in tank pump would be sufficient for such targeted 550whp - 600whp.

Would i need 2 Walbro 255lph for such WHP?

IF 2 Walbro would i need to run 2 6AN fuel line to the front of my car? or a single 6AN will do?

So sorry for such question which i believe thousand of ppl have asked . i was hoping to keep my budget low but i believe WHP doesn't come cheap so i would need to optimize my $$$$

Cheers

DC

You will struggle to come close to 600rwhp (440rwkw) on PULP with a GT35.

550rwhp is probably the upper limit there.

If you want a jap pump, a nismo or similar will be fine.

Otherwise a big bosch will also do. Forget wasting time with walbro fuel pumps.

From what I know the good jap pumps (nismo, sard etc) run out of puff at the 450rwkw mark. Have seen a couple of setups with that sort of number who could not go further due to their fuel system.

one pump fuel you should be able to see you max out the 35R. a Nismo/Tomei replacement pump or a single Bosch 044, thought thats getting to the point where a surge tank isnt a bad idea.

wow i was tired when i posted that.

one pump should be enough to see you max out the 35R. a Nismo/Tomei replacement pump or a single Bosch 044, thought thats getting to the point where a surge tank isnt a bad idea.

From what I know the good jap pumps (nismo, sard etc) run out of puff at the 450rwkw mark. Have seen a couple of setups with that sort of number who could not go further due to their fuel system.

How about the bosch 040 and 044 fuel pumps, when do they normally run out of puff?

one pump fuel you should be able to see you max out the 35R. a Nismo/Tomei replacement pump or a single Bosch 044, thought thats getting to the point where a surge tank isnt a bad idea.

wanted to put the surge tank but ust afraid that the whole car will smell like fuel.......

wanted to put the surge tank but ust afraid that the whole car will smell like fuel.......

its not really the surge tank that makes the smell, more the fittings associated with it.

my engine build is going for around 600hp as well and ill be using twin pumps and a surge tank, ill be using all solid steel lines instead of braided to lessen the smell of fuel.

  • 4 weeks later...

Mount it under the car.

2x Bosch 044's will suit you well and provide more than adequate fuel, use a low psi lifter pump like a Carter Gold and a 2.5lt surge tank will fit.

I have run this system on my car for over 2 years, speedflow fittings all around and braided lines, I never smell fuel however the Bosch 044's do get noisy when the fuel gets hot.

Also beware of ebay and people trying to sell knock-off 044's you want the Genuine Bosch not some chinese copy.

In an rb25 R33 we made 604rwhp on a GT35R with 1.06AR, but had to use E85 to get it there. That is the highest we have had from a GT35R. The same car makes 535hp on 21psi on pump.

We are making over 1200rwhp+ with 2x GT35R's on a 20B Triple rotor.

Initial run in tune netted just under 1000rwhp @ only 21psi.

We have pushed the GT35R's to 38psi, figure was good but not giving away any secrets, car is in the 7 second quarter mile club now... only running 28x9 tyres and still untubbed.

This is tuning with the big boys though... M800 with 90% Methanol mix.

Edited by Parag0n

If you don't want to run a surge tank, try a 040 intank then an 044 in series... mount the 044 under the car and use the stock fuel lines. I'd also suggest running the 044 from a speed controller/pwm.

Or use your stock fuel pump to feed an undercar surge tank, and use a single good quality fuel pump such as a weldon a2005-a or 2015-a.

Or use your stock fuel pump to feed an undercar surge tank, and use a single good quality fuel pump such as a weldon a2005-a or 2015-a.

Have you used a Weldon pump; they look awesome!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...