Jump to content
SAU Community

Recommended Posts

hey guys, had an accident last week.. got cut off on highway and hit barrier at 110km/h.. got out of it ok.. i think my air flow meter may be screwed.. it idles fine just once you come on boost it starts missing pretty bad.. almost like its actually running on 5 cylnders.. sounds like a wrx.. well a sick one! anyway i got home and let it idle for a few seconds and thought i heard a wierd sound.. so i take off the pod.. and put my ear up to the air flow meter..and sure enough.. i hear a little sound.. sounds like a bell!!!! WTF! like a little bell just ting.. ting.. etc.. is my turbo on its way out.. the car still felt pretty strong before the accident and i have never noticed this sound b4? any one know anything? any help would be great. by the way this is a rb20det.

cheers.

Link to comment
https://www.sau.com.au/forums/topic/33702-weird-noise-from-turbo/
Share on other sites

:upurs: nah, its funny because you drive down there pretty much any day and see all these cars that have like hit the side barrier, and its like 5 lanes and so open wide viewing angle the whole way to the GC and everything.. it makes the Monash and Ring roads in melbourne look like narrow roads so i'm not sure people manage it!

Thats some nice whoring.

I'd take it to a profesional for an opinion. Maybe pull the af meter off and havea look to see if anythings loose in there, check wiring hasn't been crushed in the inner guard if the car was an auto before the conversion.

Probably pull the front pipe off and have a look in the turb to see if you can see any chips in the blades and have a feel for play in the shaft. BB turbo should have very little shaft play.

Unless somethings fallen off the af meter then the turbo shouldn't have eaten anything though.

.. i was heading into brisbane, in the left lane and some **** head decide to take my lane.. he was going quick and there was a car ahead of him.. so he cut me off.. predator.. before you open your uselss mouth about shit you dont know nothing about go to your kitchen and get a glass of shut the hell up.. call me a fool for running into the barrier.. f**k you! bhdave, DJ_L3ThAL thanks for the replys.. ill have to pull the turbo off and check it out.

Just take the pipe from the compressed side off and look for "shiny bits" first. May save some work.

remember a turbo spins way quick so if it was interfering anywhere it would sound like a squeal

"interfering...squeal" sounds like gordo and DJ with their 14 yo :)

took everything off bar the turbo and there doesnt seem to be any signs of anything. the turbo wheel spins freely and there is no metal shavings.. there is very little play in the turbo as well.. hmmm.. but i guess when its spinning as fast as it would when i come on boost if there was a tiny bit of play it would get worse????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sane enough. Remove the roof liner, because the acid will go everywhere.
    • Thanks guys, I really appreciate the help and experienced opinions.  I have spent a lot of my life working on boats so I'm pretty good with fibreglass. I'll take everybody's advice in here;  I'll cut a little more of the 2nd layer away as it's a bit crunchy rust and also it's sitting high now. Then I'll wire brush it all a bit to get off anything loose, then I'll soak the bejesus out of it all in rust converter. I'll make sure to get a little hose piece and feed it into all the holes and gaps between the roof layers. Then I'll fibreglass up the holes.  Then I'll get a pallet of filler and mix it with 3 buckets of hardener and hope that is enough to build up the roof corner.  Does that sound sane? Is one type of filler better than others for this?
    • My goals for it atm are to get it registered, respray and some mild power gains eventually... I picked up the car from an elderly gentleman near the border of NSW and VIC, its honestly a bit rough and looks like its been driven on a farm (because there was so much dirt underneath). Last week I dropped the subframe and emptied the old fuel out + added a new fuel pump (think the old one went bad from old fuel). Now I'm onto fixing a coolant leak at the rear of the engine + adding a new radiator as the old one is corroded. After that i have a new bumper, coils (as the old were leaking) and lots more
    • Welcome buddy! Plenty on here and YouTube. What are your plans for it? Good luck with the Rwc and Rego bud!
    • Love this so much! Please post a photo when you have a bike on the trailer.  I was a little bit worried about having a tow bar on the Skyline, but having it hidden behind the number plate is genius
×
×
  • Create New...