Jump to content
SAU Community

Burning (oil?) Smell Through Ac

simply_mighty

By simply_mighty,
in Four Door Family & Wagoneers

 Share

Recommended Posts

simply_mighty Enthusiast

simply_mighty

Posted
Posted (edited)

Hi guys,

I recently purchased my M35 250T RS privately and am based in Canberra.

Today while driving home from work I noticed a distinct burning-oil-type smell coming from the AC vents that disappeared when the AC was turned off. Additionally, when I pulled over and opened the bonnet I could see a faint smoke (if you will) coming from the passenger side near the dipstick. The car was only recently serviced on Tuesday last week and the previous owner has not had any trouble with the car in such a way before.

I had a quick look underneath and there is a bit of oil residue/seepage near the turbo (Passenger side). I haven't noticed a decrease in boost pressure and engine temps are fine (as far as stocko guages can tell me). From work colleagues who have been car pooling with me at the time and on earlier dates; they say they've noticed it very briefly when driving around but thought it was the vehicles that were in front of us at the time.

The main thing is, my partner's car is in strife and we're due a baby any day now so I want to know what this is so I can rectify it ASAP, so I ask what are possible options for this?

P.S - LONG time reader, first time poster :P

Sean

Edited by simply_mighty
Link to comment
https://www.sau.com.au/forums/topic/337066-burning-oil-smell-through-ac/
Share on other sites
iamhe77 Grand Master

iamhe77

Posted
Posted

As chook said, check the oil level... but you should know that a common complaint with the VQ25det is that the passenger side bank will leak oil from under the cam cover. It may be leaking and dripping onto the turbo which could explain the smoke. "Simple" solution is to have the gasket under the cam cover replaced.

If the previous owner went nuts with the degreaser, might that actually be what you are smelling?

alu-siv_stagea Community Regular

alu-siv_stagea

Posted
Posted

perhaps some oil leaked out of the oil filter at time of service and dripped down around the gearbox i noticed it a couple of times when i did servicing on my series two, and its the same story a burning smell through the vents and minor smoke from under the bonnet.

scotty nm35 Grand Master

scotty nm35

Posted
Posted
So the general consensus is that it is a relatively easy fix?

Where would I go about sourcing a gasket if need be?

Sean

Nissan, I think it was around $70 unless that was an imported price. It isnt the same as the 350z so I will have to get the part no. for you.

Not a big job, just be careful with the rear section, its hard to keep the rubber gasket in the groove due to the heater pipes. You will need to remove the top part of the plenum first though.

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)
So the general consensus is that it is a relatively easy fix?

Where would I go about sourcing a gasket if need be?

Sean

Nissan

Part #13270-AL612 :dry:

Should be around $20 and will have to come from Japan (10 day lead time)

Edited by iamhe77
iamhe77 Grand Master

iamhe77

Posted
Posted
Cheers iamhe77 - is that for both or just the one bank? I assume just the one bank although I may as well do both while I'm there

Sean

Just the passenger side bank mate.

If the driver's side bank isn't leaking, don't bother replacing it... Reason being that there are built in seals in the cam covers which stop oil from going into the spark plug holes. These seals can break.

So if it ain't broke, don't fix it in this instance :D

If the seal is busted, you will have to buy a new cam cover... and they go for around $300 each :dry:

matty_M35 Collaborator

matty_M35

Posted
Posted

just did my one the other week had the same smell you speak of!! check with a torch at the rear of the passenger cam seal you will prob see a liitle seepage.. replacing is a little bit of a bitch due to the space you have to work with.. and bit and pieces you need to move.. if you have a uni-joint socket adapter it will be your best friend for removing all the cam cover bolts.. and be sure to be careful not to damage the sparkplug valley seals. (i applied some dirko to one of mine as the spark plug was swimming in oil)

the part cost me $27 from col crawford nissan brookvale 2 days but thats coz it came from WA.

all this is pending thats the problem.. goodluck!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...