Jump to content
SAU Community

Recommended Posts

Ive installed mine on the 34 but for some reason, the Bass noise from the rear speakers are not hooked up. The standard rears have pretty good bass but when i installed it, there is noise but no bass. Then I somehow wired up 1 extra wire and it came on but only up to a certain level then it would cut out!??

Can anyone help? :headspin:

Link to comment
https://www.sau.com.au/forums/topic/33715-anyone-installed-a-stereo-in-r34/
Share on other sites

what components have u installed? like h/u, amps, speakers, subs etc?

and where did u find this "1 extra wire" from?

and i've love to see some pics if possible - cos i just bought an R34 aswell, and will be planning to install my full sound system in very soon [hopefully]

yeah make sure all the wires are connected properly [positive-positive; negative-negative].

but i wouldnt think that phase cancellation would cause ALL the bass to 'disasppear'. but i cant think of any other reason why it mite be doing that...

no... all the wires were right... normal 4 wires for the rear speakers.. Then noticed there was absolutely no bass from the rears. Connected another wire to one of the positive or negative wire and bass came on!! But when its too loud, it cuts out??? So i have to keep it at a medium level.. Still cant work it out.

ANY IDEAS?

it sounds like youve got a wire being earthed or it's cutting out,. i had this problem once when me and a friend installed a head unit in my old vl. one of the wires was touching on another and the sound was shit and lacked heaps of bass it would also cut out going past a volume of like 10 out of 40. we found out one of the speaker wires and touching another bare wire and causing it do wierd stuff.

also the speakers will share a common wire, check you've hooked this up properly too

  • 10 months later...

You dont need to remove the centre consol.

From the begining for those that dont know...... remove the ashtray, there is a screw behind the ashtray. Now you can remove the shifter surround. It just lifts up. Now at the bottom of the stereo facia are two screws, remove them. The next part, if you use a screwdriver you can damage the dash. Use a paint scraper, put it down the crack between the dash and heater controls and wedge out the heater controls. There are two screws behind them holding the facia on. Remove the facia, unplugging anything that has to unplugged. Now unscrew the 4 screws holding the stereo brackets in. Unscrew the stereo and your new one will line up perfectly with the factory holes in the brackets. You do not need the cage so dont cut the facia and try and use it. Like every other nissan, you will be left with a small gap around the stereo. Your local audio shop may sell a trim for this. We sell them at work for $10. Or wrap a piece of velcro arouund the stereo ( just the fluffy side)

As it says in the sticky about redrilling the brackets to make that trim fit.... ignore it. A very rough and incorrect way of doing it, also very time consuming! If ya have any questions, feel free to pm me! :rofl:

BADHAB|T, Thanks for that info! :P

let me get this straight. Allyou need to remove are:

1. The gear stick surround, and

2. The stereo surround which is attached to together with the heater surround.

(Just wedge it out between the heather console and the dash surround).

Right?

NJR 34GTT : bang on man! Excellent step by step guide!

gaki : no worries dude! The vents are seperate NOT the heater controls, the heater controls are attatched to the stereo etc. (sorry for the mixup, been a while since I worked on an R34) The vents wedge out which exposes 2 screws holding the stereo facia in. Check out the link NJR posted, its easier to see it sometimes.

Oh, once you have mastered your car you will be able to do most Nissans! They all come apart in a very similar way. :D

Also, to wedge the vents out, ont use a small screwdriver as shown. You can dent and damage the dash. Use a paint scraper or something similar.

I'm about to install speakers into my car.

Do you have to remove the rear parcel shelf to do the rear speakers??

I want to fill the under side of the shelf with dacron at the same time, I'm wondering if this is going to be any good??

cheers

BASS OUT

Yes, but like every Nissan you have to remove the rear seat to be able to remove the tray (Except Nissans where the back seat folds down).

No, use proper sound deadening sheets, that fluffy stuff doesnt do nothing.

The idea is to make the tray as solid as poss to eliminate rattles but also making it more solid means less energy is wasted in vibrations, therefore making the music sound better.

Thanks Badhabit.

I have previously had the black deadening stuff in the front doors of a VS Calais and it made quite a difference.

I guess it's not a hard job to put the deadening black stuff on the back steel shelf, but how do you put it on the parcel tray itself??

Cheers

BASS OUT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...