Jump to content
SAU Community

Recommended Posts

Ive installed mine on the 34 but for some reason, the Bass noise from the rear speakers are not hooked up. The standard rears have pretty good bass but when i installed it, there is noise but no bass. Then I somehow wired up 1 extra wire and it came on but only up to a certain level then it would cut out!??

Can anyone help? :headspin:

Link to comment
https://www.sau.com.au/forums/topic/33715-anyone-installed-a-stereo-in-r34/
Share on other sites

what components have u installed? like h/u, amps, speakers, subs etc?

and where did u find this "1 extra wire" from?

and i've love to see some pics if possible - cos i just bought an R34 aswell, and will be planning to install my full sound system in very soon [hopefully]

yeah make sure all the wires are connected properly [positive-positive; negative-negative].

but i wouldnt think that phase cancellation would cause ALL the bass to 'disasppear'. but i cant think of any other reason why it mite be doing that...

no... all the wires were right... normal 4 wires for the rear speakers.. Then noticed there was absolutely no bass from the rears. Connected another wire to one of the positive or negative wire and bass came on!! But when its too loud, it cuts out??? So i have to keep it at a medium level.. Still cant work it out.

ANY IDEAS?

it sounds like youve got a wire being earthed or it's cutting out,. i had this problem once when me and a friend installed a head unit in my old vl. one of the wires was touching on another and the sound was shit and lacked heaps of bass it would also cut out going past a volume of like 10 out of 40. we found out one of the speaker wires and touching another bare wire and causing it do wierd stuff.

also the speakers will share a common wire, check you've hooked this up properly too

  • 10 months later...

You dont need to remove the centre consol.

From the begining for those that dont know...... remove the ashtray, there is a screw behind the ashtray. Now you can remove the shifter surround. It just lifts up. Now at the bottom of the stereo facia are two screws, remove them. The next part, if you use a screwdriver you can damage the dash. Use a paint scraper, put it down the crack between the dash and heater controls and wedge out the heater controls. There are two screws behind them holding the facia on. Remove the facia, unplugging anything that has to unplugged. Now unscrew the 4 screws holding the stereo brackets in. Unscrew the stereo and your new one will line up perfectly with the factory holes in the brackets. You do not need the cage so dont cut the facia and try and use it. Like every other nissan, you will be left with a small gap around the stereo. Your local audio shop may sell a trim for this. We sell them at work for $10. Or wrap a piece of velcro arouund the stereo ( just the fluffy side)

As it says in the sticky about redrilling the brackets to make that trim fit.... ignore it. A very rough and incorrect way of doing it, also very time consuming! If ya have any questions, feel free to pm me! :rofl:

BADHAB|T, Thanks for that info! :P

let me get this straight. Allyou need to remove are:

1. The gear stick surround, and

2. The stereo surround which is attached to together with the heater surround.

(Just wedge it out between the heather console and the dash surround).

Right?

NJR 34GTT : bang on man! Excellent step by step guide!

gaki : no worries dude! The vents are seperate NOT the heater controls, the heater controls are attatched to the stereo etc. (sorry for the mixup, been a while since I worked on an R34) The vents wedge out which exposes 2 screws holding the stereo facia in. Check out the link NJR posted, its easier to see it sometimes.

Oh, once you have mastered your car you will be able to do most Nissans! They all come apart in a very similar way. :D

Also, to wedge the vents out, ont use a small screwdriver as shown. You can dent and damage the dash. Use a paint scraper or something similar.

I'm about to install speakers into my car.

Do you have to remove the rear parcel shelf to do the rear speakers??

I want to fill the under side of the shelf with dacron at the same time, I'm wondering if this is going to be any good??

cheers

BASS OUT

Yes, but like every Nissan you have to remove the rear seat to be able to remove the tray (Except Nissans where the back seat folds down).

No, use proper sound deadening sheets, that fluffy stuff doesnt do nothing.

The idea is to make the tray as solid as poss to eliminate rattles but also making it more solid means less energy is wasted in vibrations, therefore making the music sound better.

Thanks Badhabit.

I have previously had the black deadening stuff in the front doors of a VS Calais and it made quite a difference.

I guess it's not a hard job to put the deadening black stuff on the back steel shelf, but how do you put it on the parcel tray itself??

Cheers

BASS OUT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I myself AM TOTALLY UNPREPARED TO BELIEVE that the load is higher on the track than on the dyno. If it is not happening on the dyno, I cannot see it happening on the track. The difference you are seeing is because it is hot on the track, and I am pretty sure your tuner is not belting the crap out of it on teh dyno when it starts to get hot. The only way that being hot on the track can lead to real ping, that I can think of, is if you are getting more oil (from mist in the inlet tract, or going up past the oil control rings) reducing the effective octane rating of the fuel and causing ping that way. Yeah, nah. Look at this graph which I will helpfully show you zoomed back in. As an engineer, I look at the difference in viscocity at (in your case, 125°C) and say "they're all the same number". Even though those lines are not completely collapsed down onto each other, the oil grades you are talking about (40, 50 and 60) are teh top three lines (150, 220 and 320) and as far as I am concerned, there is not enough difference between them at that temperature to be meaningful. The viscosity of 60 at 125°C is teh same as 40 at 100°C. You should not operate it under high load at high temperature. That is purely because the only way they can achieve their emissions numbers is with thin-arse oil in it, so they have to tell you to put thin oil in it for the street. They know that no-one can drive the car & engine hard enough on the street to reach the operating regime that demands the actual correct oil that the engine needs on the track. And so they tell you to put that oil in for the track. Find a way to get more air into it, or, more likely, out of it. Or add a water spray for when it's hot. Or something.   As to the leak --- a small leak that cannot cause near catastrophic volume loss in a few seconds cannot cause a low pressure condition in the engine. If the leak is large enough to drop oil pressure, then you will only get one or two shots at it before the sump is drained.
    • So..... it's going to be a heater hose or other coolant hose at the rear of the head/plenum. Or it's going to be one of the welch plugs on the back of the motor, which is a motor out thing to fix.
    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
×
×
  • Create New...