Jump to content
SAU Community

Recommended Posts

hey guys, i have recently purchase some rims from a member on here. its 18" buddy club p1 racing. Well the problem is, i have some cheap tyres on atm until thursday when i get new tyres, when i drive there is a constant loud noise coming from the wheels. It sounds like i have an exhaust installed. LOUD and it rumbles the car.

could this be the tyres? the tyres itself is very bumpy.. the treads are rough.

thanks

beepee

Link to comment
https://www.sau.com.au/forums/topic/337475-tyres-help/
Share on other sites

My V35 has VERY bad road noise depending what tyres are on the car. I got rid of some Bridgestones because I couldn't put up with the noise. My feeling is that V35s do not have very good (if any) sound deadening in the floor. I intend to buy some Dynamat style padding and pull out the seats/carpets and put much more deadening in. If you are interested in doing this to your V35 too PM me and I will get you in on my buy of the Dynamat style product from the USA when I order it in coming months.

Link to comment
https://www.sau.com.au/forums/topic/337475-tyres-help/#findComment-5455626
Share on other sites

if they are cheap and directional thats the problem, does the steering wheel vibrate at high speed yet?

once they start to wear bad they will make noise, then shake the steering wheel at high speed, then when they are bad enough it will vibrate at any speed.

Link to comment
https://www.sau.com.au/forums/topic/337475-tyres-help/#findComment-5456356
Share on other sites

hey guys, thanks for the replies. Well the noise produced by the tyres are beyond normal. When i had the stock rims wrapped in bridgestones it was silent (well much better then now).

however, i will be putting some toyo tyres on tomorrow, and we'll see how it goes. ill let u guys know.

thanks

beepee

Link to comment
https://www.sau.com.au/forums/topic/337475-tyres-help/#findComment-5456362
Share on other sites

they were my rims! nothing is wrong with the rims it's the tyres! you can't expect too much when i've thrown in free tyres buddy! and they are pretty shaggered anyway and they are uni directional

btw make sure you make the right tyre choice! some tyres are more noiser than others

Edited by nos man
Link to comment
https://www.sau.com.au/forums/topic/337475-tyres-help/#findComment-5456587
Share on other sites

they were my rims! nothing is wrong with the rims it's the tyres! you can't expect too much when i've thrown in free tyres buddy! and they are pretty shaggered anyway and they are uni directional

btw make sure you make the right tyre choice! some tyres are more noiser than others

sorry about that buddy, just got me worrying. Yea I was intending that the tires is the cause of this drama; thus im getting new tyres tomorrow (Toyo Proxes: 235/40/18)

are they any good?

thanks

beepee

Link to comment
https://www.sau.com.au/forums/topic/337475-tyres-help/#findComment-5456615
Share on other sites

I get shocking road noise from the R1R's until they're warm.

I just limiter bash the car to take away the tyre noise. Works like a charm.

i find that the R1R's on my GTR are fairly quiet, i dont hear the tyres over my exhaust and the exhaust isnt overly loud.

even pushing hard around corners they wont make noise, they might make a slight noise when the car slides but nowhere near as loud as the last tires i had on before. Nankang and Marshall's

Link to comment
https://www.sau.com.au/forums/topic/337475-tyres-help/#findComment-5457991
Share on other sites

hey guys! good news.. i got a some toyo tyres and they made a massive different!

so I blame the dodgy tyres.

thanks everyone for your help, and an apology to nos_man didnt mean to accuse the rims.

thanks

beepee

Link to comment
https://www.sau.com.au/forums/topic/337475-tyres-help/#findComment-5458304
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
×
×
  • Create New...