Jump to content
SAU Community

Recommended Posts

mint condition pair of hks gt2530 pair. tiny bit of shaft play..u cant feel it. never seen bore than .8bar. looks brand new. without actuators.

$2100 delivered anywhere in aus. pay pal accepted but surcharges applies.

Denso 720cc direct drop-in injectors for rb26 prefect working order $600 delivered

used rb26 87mm cp pistons only used for one dyno run $700 delivered

cheers Sam

Just a feeler here, but how can you tell theres any shaft play if you cant feel it?

more importantly, I hear since theyre ball bearing instead of thrust bearing you need an oil feed reducer to install these, is that included?

also would you ship to the frozen wastelands of Canada? god.. how much would that cost?

hey mate.. i have a gtr with -5 turbos and i need to upgrade my injectors will these be sufficient for around 1.5 bar? also will they fit directly in the fuel rail without modification like the nismo ones? i cant send pms so if you can send me a pm with your phone number i will contact you and make a payment online..

  • 2 weeks later...

Hi,

I finally got the turbos.... They came from Sri Lanka!!!!! And to my disgust they are not the turbos from the pictures or info provided!

What the hell mate?

These are the turbo’s I just received!

post-23119-1286415470_thumb.jpg

post-23119-1286415486_thumb.jpg

post-23119-1286415499_thumb.jpg

An explination would be great Sam!

Not sure what the bank is gonig to do exactly after you have EFT'd the money through.

Your only option is to contact the local state authorities.

Buyer beware guys.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...