Jump to content
SAU Community

Recommended Posts

Wrecking a series 1.5 gtst 83000 klm near wollongong, car is still basically complete at this stage will be stripping it next week. I will be taking the bonnet/headlights/grille and sideskirts/pods, also keeping passengers side door.

post-72691-1285926571_thumb.jpgpost-72691-1285919405_thumb.jpg

RB25DET engine with standard manifolds and turbo stock computer + haltech E6X computer and loom - $2500ono.

Prefer to sell complete but willing to separate, still running in car for the time being.

post-72691-1285919525_thumb.jpgpost-72691-1285920253_thumb.jpg

600x300x76mm intercooler with piping and silicon hoses etc $600 ono

post-72691-1285923133_thumb.jpg

5 speed manual gearbox, with everything to convert to manual except computer - $1500ono.

Prefer to sell complete but willing to separate.

Red leather front and rear seats and console/gearshift/handbrake boot has faded a little on top of rear seat $650 ono

post-72691-1285922116_thumb.jpg

Castor rods with nolathane bushes - $80

Front lower control arms - $70 ea

Front upper control arms - $50/pr

Front 5 stud hubs - $50 ea

Tein rear adjustable coilovers and standard front struts with pedders springs will work out a price once i remove them and assess their condition.

Rear lower control arms - $50 ea

Rear 5 stud hubs - $150/pair

Handbrake drum assembly incl cables - $150/pair

Manual (4.11) diff - $250

Driveshafts $75/pair

Front calipers - $275

Rear calipers - $150

Front rotors, used but good condition - $50/pair

Rear rotors, used but good condition - $50/pair

Standard R33 gtst rims 2x tyres 60% tread 2x on wear limits - $200 ono

Feel free to pm or email here and i will get back to you asap.

Edited by mark81
Link to comment
https://www.sau.com.au/forums/topic/338856-wrecking-series-15-r33-gtst/
Share on other sites

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

Bump, $4000ono for car as is minus side skirts/pods/bonnet/drivers headlight/clear indicators and grille, can throw in a damaged bonnet and drivers headlight if needed, car has been defected for FMIC and aftermarket engine management.

Have interest in exterior panels and will be removing them by the weekend, taking offers on separating the engine components.

Edited by mark81

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...