Jump to content
SAU Community

Recommended Posts

thanks heaps :down:

i was actually looking at the first one, my search didnt include the second link since i put the price limit to 1000, but it does look like its in pretty good condition thanks :)

nah not just on corollas, they do seem to be good for reliability etc though, but ill have a look at the pulsar thanks

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

the pulsars of that era are pretty prone to rust, so if you do look at any, just make sure that the body doesnt have more bog and newspaper than metal. The engines are pretty good though.

Personally I would go for a corolla, or if you can find one, an early rwd corona. Those things are damn near indestructable, and if you find a jap built one with the old 18R engine in it, then it will run forever. (they also built them here with the "starfire" engine from the 4cyl commodores...*shudders* )

Also, if you can handle the shame, a datto 120Y or any of the late datsuns/early nissans with the A series engines in them are pretty reliable and stupidly cheap to fix if they do break.

My first car was a 1993 Toyota Paseo - a/c, power steer, elec windows, all the fruit....1.5L 4cyl, i took it just over 200,000kms.

I thrashed the absolute ring off that car day in/day out, burnouts, went through 2 clutches, some tyres, yet nothing ever went wrong mechanically (other than the clutches). I still see the car every wednesday night at indoor soccer, done 260,000km now and still exactly the same when i sold it 3 years ago!!!

OP, I just bought a 1999 hyundai sonata with 257kms for $1050, rego till march. Only thing I can find wrong with it: drivers elec window gets jammed halfway. Ice cold a/c, p/s works, other windows work. V6 2.5L and it just came from Geraldton :(

Edited by Ten Four

safest bet is a corolla snap up anything with decent k's my first old 86 corolla raked up 400,000ks n sold her off for $900! haha

or a gemini, VS commodore, VL, R31, its all good. -tho a coppa mate said they always pull over old commodore's as they tend to me driven by ppl without a licence..

rooster the datsuns wouldnt be a problem, I actually quite like the look of the Pre 1983 120y's and I dont really care what people think i just need it to be reliable and cheap :P

I'll have a look at them and I'll try to find a non rusty pulsar too

thanks again everyone :rant: and congrats on the sonata ten four

Try these guys man: http://aberdeenautoauctions.com.au/

Lots of cheap stuff. I went down to bid on a 1994 rolla seca actually and or a holden nova hatch. But opened bonnet of both and saw lots of oil down the bottom (phone has a bright as LED light) - didn't bother bidding.

th_DSC00305.jpg

Saw that, opened bonnet, no oil and underneath, idled quiet as and was all red sand underneath from being in the country.

Oh yeah, somehow I ended up bidding on a 180sx with a ca18det manual... was mint too. That went for $4500 (I stopped bidding at $4400)

(Looks like they just changed their website like this arvo lol - bear with it..)

Edited by Ten Four

GET AN R31!

you should be able to pick up a series 3 executive in good condition for less than a $1000,

my first r31 was $600 and even the air-con worked awesomely.

and parts are easy and cheap to get

Erik I'm a bit worried about the fuel consumption on an R31, part of the reason why I'm looking for something like a corolla is to have a car which is a bit cheaper to run as i do need to drive quite long distances, My R34 that i get to drive sometimes now drains fuel like mad ;)

Erik I'm a bit worried about the fuel consumption on an R31, part of the reason why I'm looking for something like a corolla is to have a car which is a bit cheaper to run as i do need to drive quite long distances, My R34 that i get to drive sometimes now drains fuel like mad ;)

i don't think my 31 is that bad, its better than the camry i'm driving atm anyway.

i have noticed that the fuel economy was better once i put a new exhaust on it though and my injectors cleaned.

and i drive like a dick most of the time too.

I reckon they are great first cars. I bought a 1986 4age ae82 corolla with 287,000 on the clock for my first car, cost me $900. I did 20-30,000kms of typical p plater driving, redlining, offroading including doing a couple of jumps in it and nearly everyone one of my friends did a burnout in it atleast once. I changed the oil occasionally and not one thing ever broke on it. I ended up selling it for only $100 less than I bought it and I coulda got more for it if I tried I reckon, sold within 12 hours of putting it up for sale

hit up the car forums, someone will be selling one for under $1k...maybe think about other small cars like excels...you could get a newer one than the corolla and they are 'fairly' reliable and easy to source parts.

quokka would have lots of cars available, otherwise auctions are where you pick up the bargains on the weekdays...or even the cars that police put up for auction from hoons that don't pick the car up. You KNOW those cars have to be worth $1k or so because it costs almost $1k to pay the impound fee to get them out so cheapskates just leave it to be sold off.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...