Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

yep. buying weekly bits. decided it was better to buy all the bits for it first and work back from there. going to do the interior next. that will be a panel at at time given some of those are $400 + each.

I have a R31 as a daily so I can concentrate more on this one when funds allow.

  • 2 weeks later...

decided to order a NEW dash for it. bad thing is nissan local are saying NLA on the correct piece. they are coming back to me on the revised piece.

nothing new body wise. its still sittting on its side in gympie. I post up parts pix when I buy them. interior panels are next. all my plastic for the dash area is 2nd hand and has been sitting in boxes since I bought it. the dash pad will be new, the door and rear panels new and seats done in a 'GTR' type trim.

all of that is easily 6-8 months away.

  • 2 weeks later...

interior panels - priced.

front seat belts ordered - $265 a pop. I am using S2 GTR (94) for the belts. rears I will probably use the same car for those. ( I have a northern model 94 GTR on file at the shop.)

As far as I can see all the rear belts under every part number are available.

Part Number:88844-01U00- Description:ベルト アツセンブリ-,リヤ シ-ト タング,RH Prod.M/Y:8905-9108

Part Number:88844-01U01- Description:ベルト アツセンブリ-,リヤ シ-ト タング,RH Prod.M/Y:8905-9108

Part Number:88844-02U00- Description:ベルト アツセンブリ-,リヤ シ-ト タング,RH Prod.M/Y:8905-9108

Part Number:88844-02U01- Description:ベルト アツセンブリ-,リヤ シ-ト タング,RH Prod.M/Y:8905-9108

Part Number:88844-01U00- Description:ベルト アツセンブリ-,リヤ シ-ト タング RH Prod.M/Y:9108-9202

Part Number:88844-01U02- Description:ベルト アツセンブリ-,リヤ シ-ト タング RH Prod.M/Y:9108-9202

Part Number:88844-01U06- Description:ベルト アツセンブリ-,リヤ シ-ト タング RH Prod.M/Y:9108-9202

Part Number:88844-01U60- Description:ベルト アツセンブリ-,リヤ シ-ト タング RH Prod.M/Y:9202-

Part Number:88844-01U61- Description:ベルト アツセンブリ-,リヤ シ-ト タング RH Prod.M/Y:9202-

Part Number:88844-01U62- Description:ベルト アツセンブリ-,リヤ シ-ト タング RH Prod.M/Y:9202-

Part Number:88844-02U02- Description:ベルト アツセンブリ-,リヤ シ-ト タング RH Prod.M/Y:9108-9202

Part Number:88844-02U06- Description:ベルト アツセンブリ-,リヤ シ-ト タング RH Prod.M/Y:9108-9202

Part Number:88844-02U61- Description:ベルト アツセンブリ-,リヤ シ-ト タング RH Prod.M/Y:9202-

Part Number:88844-02U62- Description:ベルト アツセンブリ-,リヤ シ-ト タング RH Prod.M/Y:9202-

Part Number:88850-01U00- Description:ベルト セツト,リヤ シ-ト センタ- Prod.M/Y:8905-9108

Part Number:88850-01U01- Description:ベルト セツト,リヤ シ-ト センタ- Prod.M/Y:8905-9108

Part Number:88850-01U02- Description:ベルト セツト,リヤ シ-ト センタ- Prod.M/Y:9108-

Part Number:88850-01U06- Description:ベルト セツト,リヤ シ-ト センタ- Prod.M/Y:9108-

Part Number:88850-04U00- Description:ベルト セツト,リヤ シ-ト センタ- Prod.M/Y:8905-8908

Part Number:88850-04U06- Description:ベルト セツト,リヤ シ-ト センタ- Prod.M/Y:9108-

Part Number:88842-01U00- Description:ベルト アツセンブリ-,リヤ シ-ト バツクル Prod.M/Y:8905-8908

Part Number:88842-01U01- Description:ベルト アツセンブリ-,リヤ シ-ト バツクル Prod.M/Y:8905-9108

Part Number:88842-05U00- Description:ベルト アツセンブリ-,リヤ シ-ト バツクル Prod.M/Y:8908-9108

Part Number:88842-01U00- Description:ベルト アツセンブリ-,リヤ シ-ト バツクル Prod.M/Y:9108-

Part Number:88842-01U02- Description:ベルト アツセンブリ-,リヤ シ-ト バツクル Prod.M/Y:9108-

Part Number:88842-01U06- Description:ベルト アツセンブリ-,リヤ シ-ト バツクル Prod.M/Y:9108-

Part Number:88842-05U00- Description:ベルト アツセンブリ-,リヤ シ-ト バツクル Prod.M/Y:9108-

Part Number:88845-01U00- Description:ベルト アツセンブリ-,リヤ シ-ト タング,LH Prod.M/Y:8905-9108

Part Number:88845-01U01- Description:ベルト アツセンブリ-,リヤ シ-ト タング,LH Prod.M/Y:8905-9108

Part Number:88845-02U00- Description:ベルト アツセンブリ-,リヤ シ-ト タング,LH Prod.M/Y:8905-9108

Part Number:88845-02U01- Description:ベルト アツセンブリ-,リヤ シ-ト タング,LH Prod.M/Y:8905-9108

Part Number:88845-01U00- Description:ベルト アツセンブリ-,リヤ シ-ト タング LH Prod.M/Y:9108-9202

Part Number:88845-01U02- Description:ベルト アツセンブリ-,リヤ シ-ト タング LH Prod.M/Y:9108-9202

Part Number:88845-01U06- Description:ベルト アツセンブリ-,リヤ シ-ト タング LH Prod.M/Y:9108-9202

Part Number:88845-01U60- Description:ベルト アツセンブリ-,リヤ シ-ト タング LH Prod.M/Y:9202-

Part Number:88845-01U61- Description:ベルト アツセンブリ-,リヤ シ-ト タング LH Prod.M/Y:9202-

Part Number:88845-01U62- Description:ベルト アツセンブリ-,リヤ シ-ト タング LH Prod.M/Y:9202-

Part Number:88845-02U02- Description:ベルト アツセンブリ-,リヤ シ-ト タング LH Prod.M/Y:9108-9202

Part Number:88845-02U06- Description:ベルト アツセンブリ-,リヤ シ-ト タング LH Prod.M/Y:9108-9202

Part Number:88845-02U61- Description:ベルト アツセンブリ-,リヤ シ-ト タング LH Prod.M/Y:9202-

Part Number:88845-02U62- Description:ベルト アツセンブリ-,リヤ シ-ト タング LH Prod.M/Y:9202-

ok, figured I would get in before everyone else bought all the parts up.

currently in the works:

new dash pad and vents

new interior door nd rear panels

door rubbers

rear belts (gtr)

  • 4 weeks later...

spent a bit of today working on the body. bit more cleaning and disassembly of thr rear subframe. been talking to fulcrum about getting it rebushed and they need it for sizing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...