Jump to content
SAU Community

Recommended Posts

Hey guys,

Am looking into replacing my clutch as i can hear it ticking its way out :banana:

I've been reading alot but the only place i've found is Northern Brake & Clutch quoted $850 for just an EXEDY Heavy Duty by itself for r34 Gtt..

Anyone else know where i can get an exedy clutch in melbourne without the hefty price tag?

Anybody know if Super Cheat Auto beats the price of a product if found cheaper somewhere else?

Cheers

Hey guys,

Am looking into replacing my clutch as i can hear it ticking its way out :mrt:

I've been reading alot but the only place i've found is Northern Brake & Clutch quoted $850 for just an EXEDY Heavy Duty by itself for r34 Gtt..

Anyone else know where i can get an exedy clutch in melbourne without the hefty price tag?

Anybody know if Super Cheat Auto beats the price of a product if found cheaper somewhere else?

Cheers

i went there and had a look at his clutch's and exedy sports tuff are ment to be pink it was all polished

and he gave me some bs story cant remember wot he said i wanted 1 for my gtt i hear jim berry are the bomb

i was looking at ogura single plate also :D lil bit shady

the pink one have some part changed inside of it when it arrives to australia

the metal polished one has the same part in there

apperently the polished one are better than the pink once, cos my friend bought one for his WRX

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...