Jump to content
SAU Community

Recommended Posts

Hey guys n gals

Well as most of you may know, I'm 16 - And i haven't got my L's yet due to lazyness. However i'm going to go get them within the next couple of weeks. My parent's cars are both Auto, so chances are i'm going to have to drive Auto until i get my car. Before i get my car i want to know a bit more about how to drive manual. I know the basics - Changing up and down, however i don't know much else, such as what to do when you're on a hill and stuff like that. Is there any way for someone to tell me the basics?? I know its best you learn out on the road in a car but i'd like to know a bit more and some tips'n'tricks about driving manual before i go and try it for myself

Cheers,

Ryan

Link to comment
https://www.sau.com.au/forums/topic/3404-driving-manual/
Share on other sites

Don't stall the car!

(that looks really bad on a driving test :uh-huh: )

hehe

for a hill start, just start to release the clutch like you normally would but with one hand on the hand brake. As you feel the clutch engage, release the handbrake slowly and take off, so you get no roll-back.

ummm what else (it was a long time ago when i took my test LOL)

keep your hands on the 10 to 2 position on the steering wheel, and when you change gears always return them to this position...don't leave one hand sitting on the gear knob.

when you're coming to a stop at lights, always change down all the gears properly. Don't leave it in third and coast to a stop.

Make sure you take your foot all the way off the clutch after changing gears so you're not riding it at all.

That's all i can think of for now, they're all things they'll be watching for when you take your test (in regards to a manual car anyway) there's all the other general stuff as well regardless of whether it's auto or manual, like checking your mirrors, indicating etcetc...

Link to comment
https://www.sau.com.au/forums/topic/3404-driving-manual/#findComment-57372
Share on other sites

Wear a really short skirt when you take the driving test.

It's not really that hard........

Actually, I had a shocker a couple of weeks ago. I was moving a 4 door gts-t & I couldn't drive it for sh*t, I was bunnyhopping & stalling all over the place.......Very embarrasing.

Link to comment
https://www.sau.com.au/forums/topic/3404-driving-manual/#findComment-57382
Share on other sites

Guest nismogtsx

LOL.....

The short skirt is so true. I was at the Transport Dept

the other day paying for my boat lic. and this 16 year old

or 17 year old chick walked out with her testing guy and

was wearing a shirt so short you could see the bottom

of her bum......

Se wasent bad either... I bet she passed.

Then again maby he was gay???

Link to comment
https://www.sau.com.au/forums/topic/3404-driving-manual/#findComment-57682
Share on other sites

or even rent a car from avis... i think its around $50 a day, of course in manual:D

u need a credit card, or $1000 cash deposit... and get ur mom to do all this for u (its cheaper that way i think... rather than 16year old boy wanting to rent a car ... keke)

and yeah, now for the fun bit, get one of ur mate who can drive a manual and get them to teach u.... and when taking rest, get them to teach u handbrake turns, hill toe, how clutch smells when burnt... and all those things that u would never do in ur own car :)

u have a car for whole 24 hour before returning it to avis, for $50 and petrol...

thats how my friend learnt manual..

Link to comment
https://www.sau.com.au/forums/topic/3404-driving-manual/#findComment-58768
Share on other sites

lol@nissaner, a mate i know actually hired a car for a track day at Wakefield, from the on board footage i'm very surprised it didn't flip.

Jon: i've still got HPI sitten in my back seat for ya. If your cruisin this weekend give us a call, RAC33R said they might be gettin together saturday.

Link to comment
https://www.sau.com.au/forums/topic/3404-driving-manual/#findComment-60099
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...