Jump to content
SAU Community

Recommended Posts

Hi Every one, Im selling my GTR R34 Vspec for the first time, this wont come up again so I don't want dreamers or tyre kickers ringing me.

This car has everything with a list a mile long, I have spent over $150,000 on parts alone some you cant even buy any more to make this the best GTR R34 in the country.

I have got all the receipts and the work was carried out by the best in Australia, engine is standard bore 2.6 LTR and makes 510 KW with Dyno sheet at All 4 wheels below is listed just a small version of the work done.

Brand new N1 block

Brand new crank prepped

Tomei main studs and head studs

Tomei rods

Tomei rod bolts

CP pistons

Oversized Gudgeon pins

ACL race series bearings

Tomei oil pump

Hi Octane race sump with swing baffles

ATI 1000 hp balancer

Ferrera oversize stainless valves

Tomei Camshafts 10.8 lift and Tomei shim kit

Ported and flowed head work.

Hypertune custom made intake manifold and throttle body

Custom made mandrell bent intake pipe kit and the biggest Greddy Intercooler you can fit

T88 34D Greddy Turbo with ceramic coated housing and 4" dump pipe

Nismo Aluminium radiator

Aquamist water methanol injection

4" mandrell bent Stainless exhaust system

Holinger sequential gearbox brand new with Tomei shifter and shift indicator

PST 2000 hp carbon drive shaft

Ohlins Flag R coil overs custom made

Project Mu 360 mm front SCR rotors and 6 spot calipers carbon brake pads and spares

Project mu 325mm rear SCR and billet calipers

NPC billet custom clutch and crank trigger flywheel

Ikeya formula adjustable rear suspension arms

PMC surge tank with 2 x 044 bosch pumps -12 fuel lines and speed flo fittings

Rays 57F Prolight 18 x 10 rims and Pirelli P Zero tyres

Genuine nissan Vspec 2 carbon fibre bonnet with original bonnet.

Nismo white dash

Nismo MFD upgrade kit

Nismo Titanium front strut brace

Autronic SM4 with CDI with low/high boost mapping.

Genuine Nismo front bar with original one to go with the car

HKS 23 row oil cooler

PMC custom catch can

Car has been major project and is a absolute great car to drive, am moving onto something else so this is a one time opportunity to own some thing special. HPI wanted to do a feature on it but I declined, paint work is showroom not a mark or scratch on it.

Car comes with a heap of spares including Getrag 6 speed gearbox and transfer case with full PPG gear set and billet selectors, original rear drive shaft, spare Xenon head lights and a heap of other bits.

Price is $140,000 includes everything. Phone Dave on 0412 950192. I will supply all the documentation with the list of parts with invoices and all the work done. I have a lot more photos for the genuine buyer.

post-68282-1287135599_thumb.jpg

post-68282-1287135660_thumb.jpg

post-68282-1287135826_thumb.jpg

post-68282-1287136184_thumb.jpg

post-68282-1287136357_thumb.jpg

Edited by SkylineSky
Link to comment
https://www.sau.com.au/forums/topic/340632-ultimate-gtr-r34-in-australia/
Share on other sites

  • 1 month later...

Update on the car, I have had lots of enquiries however only serious were nil....

I have sold the spare gearbox and other parts so the car is now $119,000 with the Holinger.

Give me a call on 0412 950192 if your serious.

Thanks Ben, how are you mate... will be down next month and catch up... Will be a sad day to see the beast go to someone else but have got some thing else on the go..

Will refund the airfare to a genuine buyer.. You wont be disappointed..

Going great thanks buddy! :(

I think you'll regret selling, but I guess we always do at some stage! Nothings forever :)

Make sure we get together for a brew or three when you're down!

Hi Every one, Im selling my GTR R34 Vspec for the first time, this wont come up again so I don't want dreamers or tyre kickers ringing me.

This car has everything with a list a mile long, I have spent over $150,000 on parts alone some you cant even buy any more to make this the best GTR R34 in the country.

I have got all the receipts and the work was carried out by the best in Australia, engine is standard bore 2.6 LTR and makes 510 KW with Dyno sheet at All 4 wheels below is listed just a small version of the work done.

Brand new N1 block

Brand new crank prepped

Tomei main studs and head studs

Tomei rods

Tomei rod bolts

CP pistons

Oversized Gudgeon pins

ACL race series bearings

Tomei oil pump

Hi Octane race sump with swing baffles

ATI 1000 hp balancer

Ferrera oversize stainless valves

Tomei Camshafts 10.8 lift and Tomei shim kit

Ported and flowed head work.

Hypertune custom made intake manifold and throttle body

Custom made mandrell bent intake pipe kit and the biggest Greddy Intercooler you can fit

T88 34D Greddy Turbo with ceramic coated housing and 4" dump pipe

Nismo Aluminium radiator

Aquamist water methanol injection

4" mandrell bent Stainless exhaust system

Holinger sequential gearbox brand new with Tomei shifter and shift indicator

PST 2000 hp carbon drive shaft

Ohlins Flag R coil overs custom made

Project Mu 360 mm front SCR rotors and 6 spot calipers carbon brake pads and spares

Project mu 325mm rear SCR and billet calipers

NPC billet custom clutch and crank trigger flywheel

Ikeya formula adjustable rear suspension arms

PMC surge tank with 2 x 044 bosch pumps -12 fuel lines and speed flo fittings

Rays 57F Prolight 18 x 10 rims and Pirelli P Zero tyres

Genuine nissan Vspec 2 carbon fibre bonnet with original bonnet.

Nismo white dash

Nismo MFD upgrade kit

Nismo Titanium front strut brace

Autronic SM4 with CDI with low/high boost mapping.

Genuine Nismo front bar with original one to go with the car

HKS 23 row oil cooler

PMC custom catch can

Car has been major project and is a absolute great car to drive, am moving onto something else so this is a one time opportunity to own some thing special. HPI wanted to do a feature on it but I declined, paint work is showroom not a mark or scratch on it.

Car comes with a heap of spares including Getrag 6 speed gearbox and transfer case with full PPG gear set and billet selectors, original rear drive shaft, spare Xenon head lights and a heap of other bits.

Price is $140,000 includes everything. Phone Dave on 0412 950192. I will supply all the documentation with the list of parts with invoices and all the work done. I have a lot more photos for the genuine buyer.

post-68282-1287135599_thumb.jpg

post-68282-1287135660_thumb.jpg

post-68282-1287135826_thumb.jpg

post-68282-1287136184_thumb.jpg

post-68282-1287136357_thumb.jpg

Price is now $119,000 as I have sold the other gearbox and other parts.. This is a bargain for this car...

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...