Jump to content
SAU Community

Recommended Posts

Hey all

Have decided that i am going to strip my car and sell off the parts so get in quick.

Car is currently still together but will start taking her apart over the weekend

below is what i have

ITEM : GENUINE HKS 25/30 ( LESS THEN 3000KM ON TURBO, NO PLAY AT ALL )

ITEM : GENUINE HKS SERIES 2 DUMP ( LARGER WASTEGATE PIPE )

ITEM : XSPEED JAPAN STAINLESS LOW MOUNT EXHAUST MANIFOLD

ALL FITTINGS AND LINES

CONDITION : near new

THIS KIT MADE 270RWKW AND 840NM OF TORQUE ON MY BUILT RB24

AWESOME SETUP , INSTANT RESPONSE

PRICE - $2000.00 complete, $1500 for turbo- turbo lines and acuator, $300 hks series 2 dump, $500 for xspeed manifold

ITEM : Siemens 600cc injectors with HKS fuel rail

CONDITION : Near new , cost $1500 less then 500KM ago

PRICE : $ 800 complete

ITEM : Sard fuel regulator ( custom top secret sard special )

CONDITION : NEAR NEW

PRICE : $200

ITEM : Cusco coil overs for r32 ( will fit others as well )

CONDITION : great, no leaks

PRICE : $1000

ITEM : R33 GTR rims and tyres

CONDITION : OK, have a couple scrapes and rash marks

PRICE : $750

ITEM : Custom SPEED LAB front mount 600X330X125 ( BIG )

CONDITION : NEAR NEW, PIPING NOT INCLUDED

PRICE : $600

ITEM : Custom GTR plenum & throttle bodies for RB20 head

MUST HAVE FOR ANY ONE WITH A RB20!! ALOT OF HARD WORK WENT INTO THE MAKING OF THIS. SOUNDS AWESOME.

CONDITION : GREAT

PRICE : $1200

ITEM : Autronic SM-4 with custom RB loom, sensors and LED's

CONDITION : Next to brand new

CAN BE RE PROGRAMMED TO SUIT ANY APPLICATION, WAS TUNED AND AND MADE FOR ALL THE ABOVE ITEMS.

PRICE : $1900 ( sm4 alone is $2300 new )

ITEM : Kaaz 2 way diff with GTR cover plate for better cooling and more oil

CONDITION : GREAT

PRICE : $800

ITEM : R33 GTR V-SPEC front seats

CONDITION : Great, no marks or tears!

PRICE : $650.00 pair

ITEM : R32 GTST front seats

CONDITION : Good for age

PRICE : $100 pair

ITEM : HKS twin plate for RB20 ( may fit other )

CONDITION : Near new

PRICE : $1250

ITEM : N1 R32 head lights ( stand out from the crowed )

CONDITION : Great

PRICE : $400 pair

ITEM : R32 Rear PODS in white

CONDITION : OK

PRICE : $120 pair

ITEM : R32 GTR brakes with sloted rotors and top secret pads

CONDITION : great

PRICE : $600 front and rear

ITEM : Front / reat r32 strut bars

CONDITION : Good

PRICE : $150 PAIR

ITEM : CUSCO r32 brake master stopper

CONDITION : Near new

PRICE : $100

ITEM : BUILT RB24

ENGINE HAS JUST BEEN RUN IN WITH A HKS 25/30 AND IS A ANIMAL!! MADE 270RWKW & 840NM TORQUE !!!! DYNO PRINTOUT PROVEN

BOTTOM END IS BRAND NEW

SPEEDLAB CUSTOM RB24 ( CUSTOM MACHINED R34 GTR CRANK )

GRUB SCREWED CRANK

LINISHED CRANK

EAGLE RODS

TOMEI PISTONS

ARP RACE SERIES STUDS

TOMEI RINGS

PISTONS HAVE BEEN TEFLON COATED

FRESH LINE BORE AND HONE

ACL RACE SERIES MAIN AND ROD BEARINGS

CUSTOM SUMP BAFFLES WITH TRAP DOORS

CUSTOM 9L SUMP

N1 OIL PUMP

N1 WATER PUMP

CUSTOM HKS 1.2MM HEAD GASKET

THIS BOTTOM END HAS BEEN MADE TO STAND BIG HP AND BIG RPM. ONLY TOP QUALITY PARTS FROM JAPAN, USED AND THE BEST MACHINING HAS BEEN DONE.

THIS BOTTOM END HAS COST ME BIG $$$

ENGINE ( HEAD )

FULL RACE PORTING

JUN 272 – 10.8mm LIFT ( BIG ) INLET AND EXHAUST CAMS

JJR ADJUSTABLE CAM GEARS

TOMEI SPRINGS

TOMEI BUCKETS

GREDDY TIMING BELT

CUSTOM OIL DRAIN MACHINED FROM THE BACK OF THE HEAD TO SUMP.

CUSTOM PAINTED ENGINE COVERS

THIS HEAD HAS HAD OVER $7K SPENT ON IT IN MACHINING AND PARTS FROM JAPAN.

THIS WOULD MAKE A GREAT STREET ENGINE OR TRACK ENGINE.

CONDITION : NEAR NEW

PRICE : $7500

ITEM : R32 four door shell

SILVER, BODY IS A LITTLE RUFF BUT STILL PRITTY GOOD CONSIDERING ITS OVER 20 YEARS OLD

1989 MODEL

HYDROLIC HAND BRAKE

ARC FRONT CASTER ARMS

CUSCO UPPER FRONT ARMS

CUSCO REAR UPPER ARMS

CEFIRO ENGINE X MEMBER ( ENGINE SITS LOWER THE STANDARD X MEMBER )

90% OF INTERIOR STILL THERE

99% OF ALL PANELS

BOSCH 044 AND CUSTOM SWIRL POT

D1 DEEP DISH STEERING WHEEL

HEAPS OF OTHER BITS AND PEICES

MINUS THE BELOW

NO ENGINE OR ENGINE RELATED PARTS

NO GEAR BOX

NO DIFF

NO ECU OR WIRING

NO SUSPENSION

NO WHEELS

NO HEAD LIGHTS

COUPLE OTHER SMALL BITS MISSING

CONDITION : OK for age and comes with alot of parts and listed parts not with car

$2200.00 INCLUDING REGO!

OR TAKE THE COMPLETE CAR AND ALL PARTS $16K !!!

LOCATION : ALL ITEMS ARE IN ADELAIDE, POSTAGE AT BUYERS EXPENSE

CONTACT : PM ME

PICTURES : CAN MMS PEOPLE PICS

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Rims back up for sale due to sale falling thru

gixxer07, PM me your number and ill mms you pics, HKS 25/30 on a sr20 would be pritty good , nice and responsive with a decent power band

hey mate, my mate might be interested in the 33 gtr rims...still got that for sale? if do where are you located and could you please pm me some pics of it? thnx...

ITEM : Siemens 600cc injectors with HKS fuel rail

CONDITION : Near new , cost $1500 less then 500KM ago

PRICE : $ 800 complete

Are these high or low impedance?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...