Jump to content
SAU Community

Recommended Posts

Ok firstly I will apologise for starting the ten millionth thread on either of these issues. However, it seems it is fairly difficult to find straight answers on these questions.

I feel these topics really need straight, proven answers from ppl who have actually had hands on, real world experience with these issues, not a bunch of BS from keyboard jockeys.

Now for the first question:

When/if a plumb back becomes a restriction, at what boost levels does this generally occur?

Or (more to the point)

When is there ever a need for an atmo bov?

The second question:

Is It really worth converting to GTR ITB set-up on an RB?

I have searched the net for answers and keep getting the same 'he said, she said' load of crap that ends off topic anyway.

As already stated, only answers from users who have done these mods and have the experience to share.

Thanks in advance!

Cheers!

Adam

Link to comment
https://www.sau.com.au/forums/topic/341309-bovs-gtr-intake-on-gts/
Share on other sites

pretty much as above.

as plenty of threads have... leewah made over 600rwkw ob stock BOV at i believe 30+psi. so no issue.

as for ITB, arguable on the factor of cost its no fken cheap to do for the gains. IMO not worth going there till well over 350rwkw which rules out most setups.

Thanks for the fast replies!

As for the itb's, for me, cost is not an issue and i am just looking for alternatives to a modded front facing jobbie.

Edited by RBceffy25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. This is just my curiosity because iam sure the tuner figure something out...but either way i want to ask. The "problem" is that the Nistune ECU (Stagea FW and RB25DET NEO from Stagea) sees many times the speed than the speedo does(he says the speedo show 120 km/h - correct speed and the ECU shows like 510km/h ) I told him that this car/tranny getting speed from rear diff. If iam not mistaken the RB25DET NEO "need" to see tranny speed sensor? (my tranny has the plug for it). So couple of "question" If he connects/wire the speed sensor to the tranny...are the signals gonna intervene and if...what if he disconnects the rear diff one and the speedo stops working? Or the "new" sensor from the tranny "take over" and will not going need the one from diff? As i said i know he figure/get that done...iam just curious to know what are the solutions 🙂 
    • Your IACV is set to idle too low. You need to adjust it via the screw Duncan mentioned. From memory it should be 650rpm with the valve electrics unplugged. What is it trying to idle at with the IACV plugged in?
    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
×
×
  • Create New...