Jump to content
SAU Community

Recommended Posts

GTR sold today. As sad as it is I have opted to look for an M35 over a 34 GTR.

As mad as you think I am , the stress of a modified GTR takes it's toll, and I can't own one unless it's modified.

What I'm after is just some advice on a few yards in Sydney.

I've been to prestige in Mosman and like what they have and seem to be nice guys. Are there any other yards worth looking at? Are there specific things I should be looking for in the car.

I want a turbo but prefer a later model series 2 which I believe aren't turbo'd. Does anybody think a later model car offers any more then just piece of mind over series 1. They seem very similar otherwise.

Any other random advice would be great as tomorrow is car shopping therapy day.

Link to comment
https://www.sau.com.au/forums/topic/342537-time-to-buy-an-m35/
Share on other sites

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

What I would suggest is drive a few of them. Both series 1 and 2 and in 2wd and awd, although series 1 you only have one option of awd.

After driving a few around, I have not made a decision on which is better, and perhaps there is no definitive answer. I love both the turbo and na versions, although I do own a turbo, I would still love to own an na. The torque you feel on the 3.5L donk is simply sensational as soon as you step on the gas. Obviously it runs out of puff up high.

Another point which may or may not be important to you is the how the Attesa works between the turbo and na cars. Turbos run on a hydraulic system while the NA's runs on a clutch setup. I don't know which system is better than the other. Perhaps they are very comparable to each other. I've felt how the series 2 Attesa works (the clutch system) and can't really notice the difference from the series 1 cars (hydraulics). They are both a pleasure to experience imo.

Good luck with it.

That car is certainly a sexy beast and was nice to drive, but having owned a GTR and my wife agrees, we really want Awd. Only problem is that has limited our options.

I am the same,I want a turbo but rather a more recent model in series 2 guise and the 3.5 does the job.

Can you guys tell me is there much involved in getting the radio sorted for local stations and can the pop up screen be useful for anything. Also the buttons on the dash are in Japanese kind of put my wife off. Is it easy to rectify these or more a matter of more money will solve them.

Cheers

Edited by Tonkachow

***goes and makes sure car is locked in garage*** :down:

Radio comes converted by Prestige. The numbers displayed are just 15 units or something lower that what your really listening to, if that makes sense. Its not really an issue as you just spend a little time, preprogram the stereo, and then you have all your fav's.

Eugene is right, the instant torque of the 3.5 is great, no waiting, and it certainly makes it easy to drive in the burbs.

Popup screen conversion we are waiting on (eagerly :( ), the series ones are convertible to english. for S2, we're just waiting on a program to do so, same with S2 V35's coupes/sedans. Tv conversion is available for any model. It does tell you how much fuel your using... :D

Anyone got any more info on the buttons in the M35 dash with Japanese writing.

Are the english versions still obtainable in oz and at what price??

Or do I have to try get them through the U.S V35 nissan parts register??

Anyone got any more info on the buttons in the M35 dash with Japanese writing.

Are the english versions still obtainable in oz and at what price??

Or do I have to try get them through the U.S V35 nissan parts register??

You have to buy the US control unit, then pull the buttons out of it and refit them to your unit.

I believe the control functions are not identical as in the US they do not have the "TV" option.

Anyone got any more info on the buttons in the M35 dash with Japanese writing.

Are the english versions still obtainable in oz and at what price??

Or do I have to try get them through the U.S V35 nissan parts register??

The only buttons with Japanese should be the ones controlling the trip computer/ TV screen etc. If you're looking at a series 2, there were 2x versions of the computer with slightly different button functions and layout. The last of them had a "Car Wings" button Online help system, and some of the buttons have a different layout and size to the earlier S2, and different again to the S1. I don't think the V35 is the same, but some buttons maybe interchangeable. Chris Rogers in this forum had some of the Series 1 buttons but they were mighty expensive I believe.

Check my "garage" link to the left of this post, and then check "Images" to see the button assy on my 2006 S2 M35.

Edited by Spong
The only buttons with Japanese should be the ones controlling the trip computer/ TV screen etc. If you're looking at a series 2, there were 2x versions of the computer with slightly different button functions and layout. The last of them had a "Car Wings" button Online help system, and some of the buttons have a different layout and size to the earlier S2, and different again to the S1. I don't think the V35 is the same, but some buttons maybe interchangeable. Chris Rogers in this forum had some of the Series 1 buttons but they were mighty expensive I believe.

Check my "garage" link to the left of this post, and then check "Images" to see the button assy on my 2006 S2 M35.

Yep yours is identical to the car I am looking at. Sounds like a bit of a pain to get it sorted. I know functionally it's not necessary but it kind of bugs my wife and enough reason for her to not want the car.

I'm after a 3.5litre axis sorry dimi but would have snapped yours up in heart beat otherwise. Can you tell me what was involved in getting your TV working. I know it's probably all in the info section but there is so much conversation that it takes a fair while to get through it all. Especially on mobile BB on the Ipad.

Edited by Tonkachow
Yep yours is identical to the car I am looking at. Sounds like a bit of a pain to get it sorted. I know functionally it's not necessary but it kind of bugs my wife and enough reason for her to not want the car.

I'm after a 3.5litre axis sorry dimi but would have snapped yours up in heart beat otherwise. Can you tell me what was involved in getting your TV working. I know it's probably all in the info section but there is so much conversation that it takes a fair while to get through it all. Especially on mobile BB on the Ipad.

Sorry, I should have said the M35 buttons have a different layout to the USA G35 (although some are likely interchangeable) and the V35 is the same as the M35. I believe someone made conversion stickers available at some stage but they obviously didn't look that great. For the TV conversion, you can install an Australian spec TV tuner, utilising the existing aerials, but it must be able to output NTSC video to be compatible with the M35/V35 screen. I believe you then connect this to the Aux input of the existing tuner box that's located behind the cubby hole in the passenger side boot. There's plenty of info in this forum and Chook seems to be the expert with these.

See: http://www.skylinesaustralia.com/forums/Tv...amp;hl=TV+tuner

Also, the Japanese to English conversion for the trip/fuel/service interval computer is expected soon for the S2. This won't give you Aust/NZ navigation though as maps don't appear to exist at present for the V35/M35.

Edited by Spong

Ok excellent.

All this querying hasn't been in vein as I have just done a deal on the white Series 2 Autech AWD Axis.

Won't pick the car up till late next week, but pretty happy all round.

Thanks for the help guys.

Now for insurance, what ya'll paying and who with???

Nice pickup! :P

Insurance - although there is a thread dedicated to it (too lazy to link to it today), but the short of it is either Shannon's or Just Car will give you the best quote/cover.

Personally I am with Shannon's and pay just over $900 per year via monthly installments. This includes all mods listed with an agreed value of $30k.

Oh, 33 years old, rating 1.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...